暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 4GB DDR3 1600 ECC UDIMM 2Rx8 1.5V 240-Pin Server RAM

SKU CH-BHA4-BK7DV

4 GB DDR3 1600 ECC unbuffered DIMM with CL11 latency and 1.5 V operation for servers and workstations

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 4GB

Speed DDR3 1600 (PC3 12800)

  • ECC protection prevents data corruption in critical workloads
  • 1600 MHz DDR3 speed accelerates server responsiveness
  • Dual-rank 2Rx8 layout maximises memory density per slot
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin UDIMM form factor fits DDR3 server boards

4 GB DDR3 ECC UDIMM for servers

This module adds four gigabytes of DDR3 1600 memory with ECC error correction to compatible servers and workstations. It uses an unbuffered 240-pin DIMM form factor and runs at the standard 1.5 V voltage. The dual-rank x8 organisation suits platforms that accept 2Rx8 modules. It is not compatible with desktop or laptop computers.

Capacity and headroom

A single 4 GB stick provides a modest capacity increase for systems with free DIMM slots. It handles light virtualisation, file serving and typical office workloads without exhausting memory. Larger databases, heavy virtualisation clusters or memory-intensive rendering will exceed this module alone and require additional sticks or higher-density modules.

Thermals noise and power

Standard 1.5 V DDR3 operation keeps power draw low and heat output minimal in normal server use. The unbuffered design has no active cooling components, so the module runs silently and relies on chassis airflow. Typical operating temperatures stay well within DDR3 limits when the system ventilation follows the manufacturer's guidelines.

特長

  • ECC protection prevents data corruption in critical workloads
  • 1600 MHz DDR3 speed accelerates server responsiveness
  • Dual-rank 2Rx8 layout maximises memory density per slot
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin UDIMM form factor fits DDR3 server boards

仕様

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3-12800E
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 240-pin DDR3 1600 ECC UDIMM run alongside existing DDR3 ECC unbuffered modules in my server?

It uses the standard 1.5V DDR3 voltage and 240-pin UDIMM form factor, so it can share slots with other DDR3 ECC unbuffered sticks; the system will clock all modules to the lowest common speed.

How can I confirm the module is detected at 1600 MHz with ECC active after installation?

Enter the BIOS or UEFI on boot and check the memory information screen — it should show 4 GB at 1600 MHz (PC3-12800) with ECC enabled.

Does the package include only the single 4 GB stick or are heat spreaders and cables supplied as well?

The box contains one 4 GB 2Rx8 DDR3 1600 ECC UDIMM module; no heat spreaders, cables or additional hardware are included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。