暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR3 ECC UDIMM sticks, 240-pin, matte black chips

A-Tech

A-Tech 8GB (2x4GB) DDR3 1866 ECC UDIMM 1Rx8 1.5V server RAM

SKU CH-J1N2-TSWYS

An 8 GB dual-channel DDR3 1866 kit with ECC unbuffered DIMMs for servers and workstations

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

  • 8GB dual-channel kit expands server memory capacity
  • 1866 MHz DDR3 speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • Single-rank 1Rx8 organisation improves signal integrity
  • 5 V standard voltage ensures broad platform compatibility

Server DDR3 ECC UDIMM kit

This A-Tech kit supplies 8 GB of DDR3 1866 memory in two 4 GB unbuffered ECC UDIMMs. Each module runs at 1.5 V with CL13 latency and uses a single-rank 1Rx8 organisation on a 240-pin DIMM. The kit is built for dual-channel servers and workstations that require error-correcting memory.

For DDR3 ECC unbuffered platforms only

It suits administrators upgrading or repairing servers and workstations that specifically accept DDR3 ECC UDIMM modules. Buyers whose systems need registered DIMMs, non-ECC memory, or a different DDR generation cannot use this kit. Always confirm the motherboard’s qualified-vendor list before ordering.

DDR3 1866 ECC unbuffered specification

The decisive figure is the DDR3 1866 ECC UDIMM rating at 1.5 V with CL13 timing. If the platform demands DDR3 ECC unbuffered DIMMs at this speed and voltage, the kit will fit; if it requires registered ECC, a different voltage, or another memory generation, it will not.

特長

  • 8GB dual-channel kit expands server memory capacity
  • 1866 MHz DDR3 speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • Single-rank 1Rx8 organisation improves signal integrity
  • 5 V standard voltage ensures broad platform compatibility

仕様

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC3-14900E
Capacity8GB (2 x 4GB)
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does this kit need a motherboard that takes DDR3 ECC unbuffered 240-pin DIMMs?

Yes, it is built for servers and workstations that accept DDR3 ECC UDIMM modules in 240-pin slots and will not fit desktop or laptop boards.

Will these 1.50 V modules run alongside older 1.5 V DDR3 DIMMs I already have?

They operate at the same 1.50 V standard voltage, so they can share a channel with other 1.5 V DDR3 sticks if the platform supports mixed ranks.

How can I confirm the kit is running at 1866 MHz with CL13 after installation?

Check the memory speed and latency in the BIOS or a system-info tool such as CPU-Z; they should show 1866 MHz and CL13 timings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。