我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 4GB DDR3 1600 ECC UDIMM 1Rx8 1.5V 240-Pin Server RAM

SKU CH-TAN5-WAEPT

4GB DDR3 1600 ECC unbuffered DIMM with CL11 latency for servers and workstations

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 4GB

Speed DDR3 1600 (PC3 12800)

  • ECC protects data integrity in servers with single-bit error correction
  • 1600 MHz DDR3 speed accelerates workloads with PC3-12800 bandwidth
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • Single-rank 1Rx8 layout simplifies memory-channel population
  • 240-pin UDIMM form factor fits DDR3 server and workstation slots

Server memory upgrade for DDR3 ECC platforms

This 4 GB DDR3 1600 MHz module adds capacity to servers and workstations that require ECC unbuffered DIMMs. The single-rank x8 organisation works with systems qualified for PC3-12800E memory. It is not compatible with standard desktop or laptop computers.

Standard voltage operation with ECC integrity

The module runs at the JEDEC-standard 1.5 V, drawing typical power for DDR3 1600 MHz ECC UDIMMs. Error-correcting code protects data integrity during continuous workloads without generating additional heat or acoustic load beyond the platform's normal memory subsystem.

Ready-to-install single module

The 240-pin DIMM arrives tested and qualified for immediate installation in supported DDR3 ECC unbuffered slots. No extra cables, brackets or configuration utilities are included; the performance gain comes from the added capacity and ECC protection alone.

商品特色

  • ECC protects data integrity in servers with single-bit error correction
  • 1600 MHz DDR3 speed accelerates workloads with PC3-12800 bandwidth
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • Single-rank 1Rx8 layout simplifies memory-channel population
  • 240-pin UDIMM form factor fits DDR3 server and workstation slots

商品規格

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC3-12800E
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install this 240-pin DDR3 ECC UDIMM and what step do people often miss?

Align the notch on the module with the slot key, press firmly until both side clips click shut, then verify the system detects the full 4 GB capacity in BIOS or the OS memory report.

What maintenance or replacement will this module need later?

No routine maintenance is required; if errors appear, run a memory diagnostic and replace the stick if it fails, otherwise it runs for the life of the server.

What limit appears first under sustained load with this CL11 1.5 V module?

The CL11 latency at 1600 MHz sets the throughput ceiling, so sustained bandwidth maxes out at the PC3-12800 rate before voltage or thermal limits are reached.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。