暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3 RDIMM module with black memory chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1333MHz ECC RDIMM 2Rx8 Server Memory

SKU CH-X139-3G1CG

4GB DDR3 1333MHz ECC registered server memory module with CL9 latency and 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches system bus timing
  • ECC registered design detects and corrects data errors
  • 240-pin DIMM form factor fits standard DDR3 server slots
  • 50V standard voltage ensures compatibility with DDR3 platforms

4GB DDR3 ECC RDIMM for servers

This 4GB DDR3 ECC registered DIMM runs at 1333 MHz with CL9 latency at 1.50V. It targets administrators maintaining DDR3-era servers or workstations that require registered, error-correcting memory. The single 240-pin module uses a 2Rx8 organisation and major-brand chips.

Fits registered DDR3 slots in compatible systems

The module installs in 240-pin DDR3 DIMM sockets that support registered ECC operation at PC3-10600 speed. It requires a platform that accepts registered memory and will not function in consumer boards limited to unbuffered DIMMs. Verify your system's qualified vendor list before installation.

Replaces specific Kingston part numbers

This unit serves as a direct equivalent for Kingston KVR1333D3D8R9S/4G, KTM-SX313L8/4G and KVR13R9D8/4I. The cross-reference simplifies sourcing when those exact part numbers are specified in maintenance documentation or vendor-qualified configurations.

特長

  • 4GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches system bus timing
  • ECC registered design detects and corrects data errors
  • 240-pin DIMM form factor fits standard DDR3 server slots
  • 50V standard voltage ensures compatibility with DDR3 platforms

仕様

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Will the 1.5 V requirement stay within my server's power budget under sustained load?

The module runs at the standard DDR3 1.50 V, so power draw is predictable and matches typical server DIMM specifications.

Does the registered ECC design add noticeable heat or fan noise during all-day operation?

Registered ECC DIMMs run at the same 1.50 V as standard DDR3 and do not generate extra heat or noise beyond normal server memory.

My motherboard has 240-pin DDR3 slots — is that the only requirement for this module to work?

Yes, it fits 240-pin DDR3 slots, but the board must also support ECC registered (RDIMM) memory and 2Rx8 organisation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。