暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Single green 288-pin DDR4 RDIMM module, black chips, gold contacts

A-Tech

A-Tech 64GB DDR4 2933 ECC RDIMM 2Rx4 server RAM

SKU CH-39BJ-70BPE

64 GB DDR4 2933 ECC registered DIMM with CL21 latency and 1.2 V operation

  • Capacity64GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • High-capacity 64GB module handles demanding server workloads
  • ECC RDIMM design detects and corrects data errors
  • DDR4 2933MHz speed moves data at PC4-23400 rates
  • Registered 2Rx4 architecture reduces electrical load on memory bus
  • 2V standard voltage lowers power draw per module

64GB DDR4 2933 ECC RDIMM for servers

This 64GB A-Tech module runs at DDR4 2933 (PC4-23400) with CL21 latency and 1.20V operation. It is a registered ECC DIMM built with 2Rx4 organisation on a 288-pin form factor. The stick uses major-brand chips and is validated as a direct replacement for HP part numbers P03053-091, P03053-0A1, P03053-CA1, P06192-001, P14492-B21 and P28217-B21.

Suited for registered ECC platforms only

This module fits servers and workstations that require registered ECC DDR4 memory at the 2933 speed grade. It will not work in consumer desktop boards that accept only unbuffered non-ECC DIMMs. Buyers needing unbuffered memory or a different speed bin should look at other modules.

288-pin DDR4 DIMM form factor

The single physical specification that decides compatibility is the 288-pin DDR4 DIMM form factor combined with registered ECC signalling. Verify that your system’s memory slots and BIOS support registered ECC DDR4 before ordering.

特長

  • High-capacity 64GB module handles demanding server workloads
  • ECC RDIMM design detects and corrects data errors
  • DDR4 2933MHz speed moves data at PC4-23400 rates
  • Registered 2Rx4 architecture reduces electrical load on memory bus
  • 2V standard voltage lowers power draw per module

仕様

BrandA-Tech
Capacity64GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Does this 64GB module use the standard 288-pin DDR4 DIMM form factor?

Yes, it is a 288-pin DDR4 DIMM that fits any server or workstation slot built for registered DDR4 memory.

What is the correct way to seat this registered ECC module so the system recognises the full 64GB?

Align the notch with the slot key, press down evenly until both side clips click, and populate slots in the order your motherboard manual specifies for registered DIMMs.

When should I expect to replace this 2933MHz ECC RDIMM in a typical server workload?

ECC RDIMMs have no moving parts; they are replaced only if a memory test reports uncorrectable errors or a capacity upgrade is required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。