A-Tech
A-Tech 64GB DDR4 2933 ECC RDIMM 2Rx4 server RAM
64 GB DDR4 2933 ECC registered DIMM with CL21 latency and 1.2 V operation
- Capacity64GB
- SpeedDDR4 2933 (PC4 23400)
- CAS LatencyCL21
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- High-capacity 64GB module handles demanding server workloads
- ECC RDIMM design detects and corrects data errors
- DDR4 2933MHz speed moves data at PC4-23400 rates
- Registered 2Rx4 architecture reduces electrical load on memory bus
- 2V standard voltage lowers power draw per module
64GB DDR4 2933 ECC RDIMM for servers
This 64GB A-Tech module runs at DDR4 2933 (PC4-23400) with CL21 latency and 1.20V operation. It is a registered ECC DIMM built with 2Rx4 organisation on a 288-pin form factor. The stick uses major-brand chips and is validated as a direct replacement for HP part numbers P03053-091, P03053-0A1, P03053-CA1, P06192-001, P14492-B21 and P28217-B21.
Suited for registered ECC platforms only
This module fits servers and workstations that require registered ECC DDR4 memory at the 2933 speed grade. It will not work in consumer desktop boards that accept only unbuffered non-ECC DIMMs. Buyers needing unbuffered memory or a different speed bin should look at other modules.
288-pin DDR4 DIMM form factor
The single physical specification that decides compatibility is the 288-pin DDR4 DIMM form factor combined with registered ECC signalling. Verify that your system’s memory slots and BIOS support registered ECC DDR4 before ordering.
商品特色
- High-capacity 64GB module handles demanding server workloads
- ECC RDIMM design detects and corrects data errors
- DDR4 2933MHz speed moves data at PC4-23400 rates
- Registered 2Rx4 architecture reduces electrical load on memory bus
- 2V standard voltage lowers power draw per module
商品規格
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
商品問答
Does this 64GB module use the standard 288-pin DDR4 DIMM form factor?
Yes, it is a 288-pin DDR4 DIMM that fits any server or workstation slot built for registered DDR4 memory.
What is the correct way to seat this registered ECC module so the system recognises the full 64GB?
Align the notch with the slot key, press down evenly until both side clips click, and populate slots in the order your motherboard manual specifies for registered DIMMs.
When should I expect to replace this 2933MHz ECC RDIMM in a typical server workload?
ECC RDIMMs have no moving parts; they are replaced only if a memory test reports uncorrectable errors or a capacity upgrade is required.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



