暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 RDIMM sticks, no heat spreaders, gold contacts, black chips, 288-pin

A-Tech

A-Tech 8GB (2x4GB) DDR4 2666 ECC RDIMM 1Rx8 server RAM

SKU CH-1ZT1-T76HE

An 8 GB dual-channel DDR4 ECC registered DIMM kit running at 2666 MHz with CL19 latency for servers and workstations

  • Capacity8GB (2 x 4GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes

Capacity 8GB (2 x 4GB)

  • 4GB
  • 8GB (2 x 4GB)
  • ECC protects data integrity with registered DDR4 modules
  • 2666 MHz speed accelerates server workloads
  • Dual-channel kit doubles memory bandwidth
  • Single-rank 1Rx8 layout supports dense configurations
  • 2 V operation matches standard DDR4 voltage

8GB DDR4 2666 ECC RDIMM kit

This 8GB kit contains two 4GB registered DIMMs built for DDR4 servers and workstations that require ECC memory. Each module runs at 2666 MHz with CL19 latency at 1.2V and uses a single-rank x8 organisation. The registered buffer reduces electrical load on the memory controller in multi-module configurations.

Registered ECC with major-brand chips

The registered design adds a buffer between the DRAM and the system bus, allowing larger memory populations without signal degradation. On-die ECC corrects single-bit errors and detects multi-bit errors to protect data integrity in critical workloads. Major-brand DRAM chips are used throughout and every module is tested before shipment.

Verify DDR4 RDIMM support and channel rules

Confirm that your server or workstation accepts DDR4 288-pin registered ECC DIMMs and does not require unbuffered or load-reduced modules. Check the system manual for approved memory speeds, maximum capacity per slot, and the correct slot population order for dual-channel operation. Desktop and laptop platforms cannot use these modules.

特長

  • ECC protects data integrity with registered DDR4 modules
  • 2666 MHz speed accelerates server workloads
  • Dual-channel kit doubles memory bandwidth
  • Single-rank 1Rx8 layout supports dense configurations
  • 2 V operation matches standard DDR4 voltage

仕様

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC4-2666V-R
Part NumberAT4G2D4D2666RS8N12V
Capacity8GB (2 x 4GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 1Rx8 registered DIMMs need any firmware updates or battery-backed settings to keep ECC working over time?

No firmware or battery-backed settings are required; the ECC function is handled by the memory controller once the modules are seated in the 288-pin slots.

What thermal limit appears first when the kit runs continuously at 2666 MHz inside a fully populated server chassis?

The modules have no heat spreader, so the DRAM junction temperature reaches its rated maximum before any other component throttles.

How much heat does the dual-rank kit add to the airflow path when the system operates all day at 1.20 V?

At 1.20 V each 4 GB stick draws only a few watts, so the total thermal load stays low even in a dense 288-pin DIMM array.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。