A-Tech 4GB (4x1GB) DDR2 533MHz PC2-4200 UDIMM CL4 1.8V 240-Pin desktop RAM
- 4GB (4 x 1GB)
- 240-Pin PC RAM
A-Tech
Adds 8 GB of DDR2 533 MHz memory across four unbuffered 240-pin DIMMs running at 1.8 V with CL4 timing
Capacity 8GB (4 x 2GB)
Speed DDR2 533 (PC2 4200)
This kit contains four unbuffered DIMMs totalling 8 GB of DDR2 memory. It is intended for desktop systems that accept 240-pin modules running at the PC2-4200 standard. Each module operates at 1.8 V with a tested CAS latency of 4. The package targets owners of older AMD or Intel platforms needing a straightforward capacity increase.
All four sticks are validated to run continuously at 533 MHz without requiring voltage increases beyond the 1.80 V DDR2 norm. The Major Brand Chipset and factory screening aim to keep error rates low during extended multitasking sessions. Unbuffered topology means the memory controller drives each module directly, so signal integrity depends on motherboard trace quality at this frequency.
Verify that the motherboard supports DDR2 DIMMs at the PC2-4200 speed grade and can populate four slots in a quad-channel arrangement. Confirm the BIOS recognises 2 GB density per slot and that no registered or ECC-only restriction applies. Ensure the board’s voltage regulator can supply 1.8 V to all populated sockets simultaneously.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR2 Desktop Memory RAM |
| Model | 8GB Kit (4x2GB) PC2-4200 Desktop RAM |
| Part Number | NE-SS-0620 |
| Capacity | 8GB (4 x 2GB) |
| Type | 240-Pin PC RAM |
| Speed | DDR2 533 (PC2 4200) |
| Tested Frequency | 533 |
| Tested Timing | 4 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
Each module operates at the standard DDR2 voltage of 1.8 V. With no heat spreaders fitted, the DIMMs rely on case airflow to stay cool during continuous use.
The board needs four 240-pin DDR2 slots that support PC2-4200 unbuffered non-ECC memory at 1.8 V and must accept a total of 8 GB.
The kit is tested at 533 MHz with CL4 timing. If slower DDR2 DIMMs are present, the memory controller will run all modules at the lowest common speed and latency.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?