A-Tech 4GB (4x1GB) DDR2 533MHz PC2-4200 UDIMM CL4 1.8V 240-Pin desktop RAM
- 4GB (4 x 1GB)
- 240-Pin PC RAM
A-Tech
Adds 8 GB of DDR2 533 MHz memory across four unbuffered 240-pin DIMMs running at 1.8 V with CL4 timing
Capacity 8GB (4 x 2GB)
Speed DDR2 533 (PC2 4200)
This kit contains four unbuffered DIMMs totalling 8 GB of DDR2 memory. It is intended for desktop systems that accept 240-pin modules running at the PC2-4200 standard. Each module operates at 1.8 V with a tested CAS latency of 4. The package targets owners of older AMD or Intel platforms needing a straightforward capacity increase.
All four sticks are validated to run continuously at 533 MHz without requiring voltage increases beyond the 1.80 V DDR2 norm. The Major Brand Chipset and factory screening aim to keep error rates low during extended multitasking sessions. Unbuffered topology means the memory controller drives each module directly, so signal integrity depends on motherboard trace quality at this frequency.
Verify that the motherboard supports DDR2 DIMMs at the PC2-4200 speed grade and can populate four slots in a quad-channel arrangement. Confirm the BIOS recognises 2 GB density per slot and that no registered or ECC-only restriction applies. Ensure the board’s voltage regulator can supply 1.8 V to all populated sockets simultaneously.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR2 Desktop Memory RAM |
| Model | 8GB Kit (4x2GB) PC2-4200 Desktop RAM |
| Part Number | NE-SS-0620 |
| Capacity | 8GB (4 x 2GB) |
| Type | 240-Pin PC RAM |
| Speed | DDR2 533 (PC2 4200) |
| Tested Frequency | 533 |
| Tested Timing | 4 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Each module operates at the standard DDR2 voltage of 1.8 V. With no heat spreaders fitted, the DIMMs rely on case airflow to stay cool during continuous use.
The board needs four 240-pin DDR2 slots that support PC2-4200 unbuffered non-ECC memory at 1.8 V and must accept a total of 8 GB.
The kit is tested at 533 MHz with CL4 timing. If slower DDR2 DIMMs are present, the memory controller will run all modules at the lowest common speed and latency.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?