We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR2 DIMM sticks 240-pin no heat spreader

A-Tech

A-Tech 8GB DDR2 533MHz 4x2GB Desktop RAM

SKU CH-TA5H-59G7H

Adds 8 GB of DDR2 533 MHz memory across four unbuffered 240-pin DIMMs running at 1.8 V with CL4 timing

  • Capacity8GB (4 x 2GB)
  • Type240-Pin PC RAM
  • SpeedDDR2 533 (PC2 4200)
  • Tested Frequency533
  • Tested Timing4
  • Voltage1.80V

Capacity 8GB (4 x 2GB)

Speed DDR2 533 (PC2 4200)

  • Boosts multitasking with 8GB total capacity across four modules
  • Runs at DDR2 533MHz speed for responsive desktop performance
  • Operates at standard 1.8V DDR2 voltage for broad compatibility
  • Uses unbuffered non-ECC DIMMs for straightforward installation
  • Tested to CL4 timing for reliable operation

8GB Quad-Channel DDR2 Kit

This kit contains four unbuffered DIMMs totalling 8 GB of DDR2 memory. It is intended for desktop systems that accept 240-pin modules running at the PC2-4200 standard. Each module operates at 1.8 V with a tested CAS latency of 4. The package targets owners of older AMD or Intel platforms needing a straightforward capacity increase.

Steady-State Operation at 533 MHz

All four sticks are validated to run continuously at 533 MHz without requiring voltage increases beyond the 1.80 V DDR2 norm. The Major Brand Chipset and factory screening aim to keep error rates low during extended multitasking sessions. Unbuffered topology means the memory controller drives each module directly, so signal integrity depends on motherboard trace quality at this frequency.

Pre-Installation Checks

Verify that the motherboard supports DDR2 DIMMs at the PC2-4200 speed grade and can populate four slots in a quad-channel arrangement. Confirm the BIOS recognises 2 GB density per slot and that no registered or ECC-only restriction applies. Ensure the board’s voltage regulator can supply 1.8 V to all populated sockets simultaneously.

Highlights

  • Boosts multitasking with 8GB total capacity across four modules
  • Runs at DDR2 533MHz speed for responsive desktop performance
  • Operates at standard 1.8V DDR2 voltage for broad compatibility
  • Uses unbuffered non-ECC DIMMs for straightforward installation
  • Tested to CL4 timing for reliable operation

Specifications

BrandA-Tech
SeriesA-Tech DDR2 Desktop Memory RAM
Model8GB Kit (4x2GB) PC2-4200 Desktop RAM
Part NumberNE-SS-0620
Capacity8GB (4 x 2GB)
Type240-Pin PC RAM
SpeedDDR2 533 (PC2 4200)
Tested Frequency533
Tested Timing4
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips
Recommend UseAMD & Intel Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power and heat do four DDR2 533 modules at 1.8 V produce when the system runs all day?

Each module operates at the standard DDR2 voltage of 1.8 V. With no heat spreaders fitted, the DIMMs rely on case airflow to stay cool during continuous use.

What must my motherboard provide to run this 4 x 2 GB kit?

The board needs four 240-pin DDR2 slots that support PC2-4200 unbuffered non-ECC memory at 1.8 V and must accept a total of 8 GB.

Can I mix these PC2-4200 CL4 sticks with slower DDR2 modules already installed?

The kit is tested at 533 MHz with CL4 timing. If slower DDR2 DIMMs are present, the memory controller will run all modules at the lowest common speed and latency.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.