暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 8GB DDR4 2400 ECC RDIMM 1Rx8 CL17 1.2V Server Memory

SKU CH-NRHJ-TDMCF

8GB DDR4 2400 ECC registered DIMM with CL17 latency for server upgrades

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR4 design
  • 2400 MHz speed handles demanding server workloads efficiently
  • 2V operation reduces power consumption in dense configurations
  • Single-rank 1Rx8 layout maximises compatibility across Dell platforms
  • 288-pin DDR4 form factor fits standard server memory slots

8GB DDR4 2400 ECC RDIMM

This single 8GB registered DIMM adds error-correcting memory to compatible Dell servers and workstations. It targets administrators who need to expand capacity in systems that require registered modules with ECC support.

288-pin registered design with major-brand chips

The module uses a standard 288-pin DDR4 DIMM form factor and operates at 1.2V. Registered signalling reduces electrical load on the memory controller, while the 1Rx8 organisation and CL17 latency provide stable throughput for 2400MHz server platforms.

Replaces non-ECC or lower-capacity DDR4 DIMMs

The upgrade is worthwhile when the platform demands registered ECC memory and the current configuration lacks error correction or has free DIMM slots. Systems limited to unbuffered memory or speeds below 2400MHz cannot use this module.

特長

  • ECC protection prevents data corruption with registered DDR4 design
  • 2400 MHz speed handles demanding server workloads efficiently
  • 2V operation reduces power consumption in dense configurations
  • Single-rank 1Rx8 layout maximises compatibility across Dell platforms
  • 288-pin DDR4 form factor fits standard server memory slots

仕様

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

What speed does the DDR4 2400 interface actually run at in a server?

The module operates at 2400 MHz, delivering a PC4-19200 data rate when the platform supports that speed.

What physical slot and pin count does this 288-pin RDIMM require?

It fits a standard DDR4 DIMM socket with 288 pins; the registered design adds a buffer chip on the module itself.

How do I install the 1Rx8 registered module and what step is often missed?

Power down, open the chassis, align the notch with the key in the 288-pin slot, press firmly until the ejector tabs click, then verify in BIOS that ECC and registered mode are enabled.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。