EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
An 8 GB DDR5 desktop module running at 5600 MHz with CAS latency 40 and 1.10 V on a 288-pin DIMM
This A-Tech module is built as a direct replacement for the Dell SNPGDGT0C/8G part. It brings 8 GB of DDR5 memory to compatible desktop systems that require a 288-pin DIMM running at 5600 MT/s.
The stick is unbuffered and non-ECC, so it fits standard consumer desktops that accept 1Rx16 modules at 1.1 V. Systems that require registered or error-correcting memory will not work with this unit.
The rated data rate is 5600 MT/s, labelled PC5-44800, with a CAS latency of 40. If your motherboard or Dell chassis specifies a different DDR5 speed grade, this module will not match the required timing.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Dell SNPGDGT0C/8G |
| Model | A-Tech 8GB DDR5-5600 Desktop RAM Module |
| Capacity | 8GB |
| Speed | DDR5 5600 (PC5 44800) |
| Tested Frequency | 5600 |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand DRAM IC Chips |
| Color | Green/Black |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | Compatible Replacement for Dell SNPGDGT0C/8G |
The listing shows a single 8 GB DIMM; no other capacities are mentioned for this part number.
The memory runs at 5600 MT/s with CAS 40 at 1.1 V, delivering the standard DDR5 JEDEC speed without overclocking.
It uses the standard 288-pin DDR5 DIMM form factor; compatibility still depends on the motherboard’s qualified-vendor list.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?