Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Green circuit board with black chips, 288-pin DDR5 DIMM, no heat spreader

A-Tech

A-Tech 8GB DDR5-5600 Desktop RAM Module

SKU CH-VSNT-KXYNV

An 8 GB DDR5 desktop module running at 5600 MHz with CAS latency 40 and 1.10 V on a 288-pin DIMM

  • Capacity8GB
  • SpeedDDR5 5600 (PC5 44800)
  • Tested Frequency5600
  • CAS Latency40
  • Voltage1.10V
  • ECCNo
  • Boosts multitasking with 8GB DDR5-5600 capacity
  • Runs at 5600MHz speed for faster data transfer
  • Low 1.10V voltage reduces power consumption
  • 288-pin DIMM fits standard desktop slots
  • CL40 latency supports responsive system performance

Ready for Dell DDR5 Desktops

This A-Tech module is built as a direct replacement for the Dell SNPGDGT0C/8G part. It brings 8 GB of DDR5 memory to compatible desktop systems that require a 288-pin DIMM running at 5600 MT/s.

Suits Non-ECC Platforms Only

The stick is unbuffered and non-ECC, so it fits standard consumer desktops that accept 1Rx16 modules at 1.1 V. Systems that require registered or error-correcting memory will not work with this unit.

Speed Decides Compatibility

The rated data rate is 5600 MT/s, labelled PC5-44800, with a CAS latency of 40. If your motherboard or Dell chassis specifies a different DDR5 speed grade, this module will not match the required timing.

Puntos fuertes

  • Boosts multitasking with 8GB DDR5-5600 capacity
  • Runs at 5600MHz speed for faster data transfer
  • Low 1.10V voltage reduces power consumption
  • 288-pin DIMM fits standard desktop slots
  • CL40 latency supports responsive system performance

Especificaciones

BrandA-Tech
SeriesCompatible Replacement for Dell SNPGDGT0C/8G
ModelA-Tech 8GB DDR5-5600 Desktop RAM Module
Capacity8GB
SpeedDDR5 5600 (PC5 44800)
Tested Frequency5600
CAS Latency40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand DRAM IC Chips
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseCompatible Replacement for Dell SNPGDGT0C/8G

Preguntas sobre este artículo

Is the 8 GB module the only capacity offered for this DDR5-5600 stick?

The listing shows a single 8 GB DIMM; no other capacities are mentioned for this part number.

What does the 5600 MT/s rating mean when the module is installed in a desktop?

The memory runs at 5600 MT/s with CAS 40 at 1.1 V, delivering the standard DDR5 JEDEC speed without overclocking.

Does the 288-pin DDR5 DIMM fit every desktop board that has DDR5 slots?

It uses the standard 288-pin DDR5 DIMM form factor; compatibility still depends on the motherboard’s qualified-vendor list.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.