暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small green circuit board with a black rectangular relay and pin headers

Adafruit

Adafruit Latching Mini Relay FeatherWing 2A 250VAC engineering development tool

SKU CH-2X6N-BB2HB

A latching relay FeatherWing that switches up to 2 A at 30 VDC or 250 VAC using only two pulsed pins

  • TypeEngineering Development Tools
  • Control high-voltage appliances from any Feather board
  • Latching relay holds state without continuous power
  • Pulse SET or UNSET pin for 10ms to switch
  • Switches up to 2A at 30VDC or 0.3A at 250VAC
  • Fully assembled and tested for immediate development

Latching Relay FeatherWing for Feather Boards

This FeatherWing adds a latching relay to any Feather development board, allowing control of external AC or DC loads. It connects via stacking or female headers and uses only two microcontroller pins for operation. The module arrives fully assembled and tested, ready for immediate integration into prototypes.

Sustained Operation with Pulse Control

The latching mechanism requires a 10ms pulse on either the SET or UNSET pin to change state, then holds that position without continuous power. If system power is lost, the relay remains in its last setting, preserving the load state. This behaviour suits battery-powered or intermittent-duty applications where constant coil current is undesirable.

Switching Limits and Thermal Behaviour

The relay switches up to 2A resistive at 30VDC or ~40VAC, .6A at 110VDC, .5A at 120VAC, and .3A at 250VAC. Reactive or inductive loads require derating beyond these figures. The board itself draws negligible power while latched, and the relay housing dissipates minimal heat during normal switching cycles.

特長

  • Control high-voltage appliances from any Feather board
  • Latching relay holds state without continuous power
  • Pulse SET or UNSET pin for 10ms to switch
  • Switches up to 2A at 30VDC or 0.3A at 250VAC
  • Fully assembled and tested for immediate development

仕様

TypeEngineering Development Tools

この商品に関する質問

How much power does the latching relay draw when it stays on all day?

The latching relay only needs a 10 ms pulse on the SET or UNSET pin to change state, so it draws no coil current while holding position.

Which Feather boards and headers must I already have to use this FeatherWing?

Any Feather board works; you connect the wing with Feather Stacking Headers or Feather Female Headers and use two GPIO pins for SET and UNSET.

Can I keep my existing 120 VAC devices and switch them with this relay?

Yes, at 120 VAC the relay handles up to .5 A resistive; check the datasheet for inductive loads and derate accordingly.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。