暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small brass nozzle with knurled silver collar and quick-release button

Adventurer 5M Pro Nozzle 0.6mm 32mm³/s 280°C 3s Quick-Detachable 3d printers accessory

SKU CH-25SM-WDC94

A hardened 0.6 mm nozzle delivers 32 mm³/s flow at up to 280 °C and swaps in three seconds

  • TypeAD5-HS-Nozzle
  • Compatible System0.4 mm
  • Specification0.4 mm
  • Features0.4 mm
  • High flow 32 mm³/s supports rapid printing speeds
  • Quick-detachable design removes nozzle in 3 seconds
  • Hardened 0.6 mm tip withstands abrasive filaments
  • Heats to 200 °C in 35 seconds for fast starts
  • Maximum temperature 280 °C enables advanced materials

0.6 mm high-flow nozzle for Adventurer 5M Pro

This 0.6 mm hardened nozzle is built for the Adventurer 5M Pro hotend. It supports a maximum flow rate of 32 mm³/s and withstands temperatures up to 280 °C. The tool-free quick-detach mechanism removes the nozzle in roughly three seconds. It targets users printing abrasive or high-strength filaments at speed.

280 °C limit and 35-second heat-up constrain

The nozzle reaches 200 °C in about 35 seconds and tops out at 280 °C. Filaments requiring higher processing temperatures cannot be used. The 0.6 mm bore sets a practical lower bound on layer height and detail resolution. Buyers needing finer features or higher-temperature polymers should look elsewhere.

32 mm³/s flow rate defines high-speed capability

The rated 32 mm³/s extrusion rate is the single figure that determines whether this nozzle matches your speed targets. At 0.6 mm diameter it balances throughput with the durability needed for carbon-fibre composites. If your workflow demands a different volumetric rate, another nozzle size is required.

特長

  • High flow 32 mm³/s supports rapid printing speeds
  • Quick-detachable design removes nozzle in 3 seconds
  • Hardened 0.6 mm tip withstands abrasive filaments
  • Heats to 200 °C in 35 seconds for fast starts
  • Maximum temperature 280 °C enables advanced materials

仕様

BrandA
ModelAD5-HS-Nozzle
Part NumberAD5-HS-Nozzle
TypeAD5-HS-Nozzle
Compatible System0.4 mm
Specification0.4 mm
Features0.4 mm

この商品に関する質問

Should I choose the 0.25 mm, 0.4 mm, 0.6 mm or 0.8 mm nozzle for my printer?

The 0.6 mm nozzle handles abrasive filaments such as carbon fibre and provides higher flow. The 0.25 mm gives fine detail, the 0.4 mm balances speed and precision, and the 0.8 mm offers maximum throughput.

What does the 32 mm³/s flow rate mean when the nozzle is installed?

It allows the hotend to extrude up to 32 cubic millimetres of filament per second, supporting stable high-speed printing with the 0.6 mm aperture.

How does the quick-detachable interface work and what does it limit?

A button releases the nozzle in about 3 seconds without tools. It is designed for the Adventurer 5M hotend, so compatibility is limited to that system.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。