暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular metal mining unit with front grille and rear power connectors

Antminer

Antminer S19 82Th/s 2829W SHA-256 mining hardware

SKU CH-3F47-DK813

SHA-256 ASIC miner delivering 82 Th/s at 2829 W with Ethernet connectivity and 220 V input requirement

  • 82 Th/s ±3 % hashrate for high SHA-256 mining throughput
  • 2829 W ±5 % wall power at 25 °C for efficient energy use
  • 200–240 V AC input range matches standard 220 V supply
  • Ethernet connection enables remote monitoring of mining progress
  • High-speed fans improve heat dissipation for stable continuous operation

Antminer S19 82Th/s SHA-256 Miner

The Antminer S19 is an ASIC mining system built for the SHA-256 algorithm. It delivers a nominal hashrate of 82Th/s with a tolerance of ±3%. The unit draws approximately 2829W at the wall with a ±5% variance. It ships with an integrated power supply and connects via Ethernet.

Suited for SHA-256 mining at 200–240V input

This hardware targets operators mining Bitcoin or other SHA-256 coins who can provide a 200V to 240V AC supply. The design uses high-speed fans for heat dissipation and allows remote monitoring. Buyers limited to lower-voltage mains or those needing a different algorithm should look at other equipment.

82Th/s hashrate at 2829W power draw

The efficiency ratio defined by the 82Th/s hashrate and 2829W consumption is the decisive specification for profitability calculations. Confirm your site can meet the 220V nominal requirement before deployment.

特長

  • 82 Th/s ±3 % hashrate for high SHA-256 mining throughput
  • 2829 W ±5 % wall power at 25 °C for efficient energy use
  • 200–240 V AC input range matches standard 220 V supply
  • Ethernet connection enables remote monitoring of mining progress
  • High-speed fans improve heat dissipation for stable continuous operation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What input voltage does the Antminer S19 82Th/s require for safe operation?

The Antminer S19 82Th/s requires an AC input voltage between 200 V and 240 V. Supplying 220 V is typical; voltages outside this range can damage the unit.

How do I connect the Antminer S19 82Th/s to the network for initial setup?

Connect the built-in Ethernet port to your router or switch using a standard network cable. The miner obtains an IP address via DHCP, then you access its web interface from a browser on the same network.

What routine maintenance does the Antminer S19 82Th/s need to sustain its 82 Th/s hashrate?

Clean the high-speed fans and heatsink fins regularly to prevent dust build-up that reduces cooling efficiency. Monitor the 2829 W power draw; a sustained rise often signals degrading thermal paste or failing fans.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。