暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact grey resin 3D printer with 10.1 inch monochrome LCD screen and hinged orange cover

ApexMaker

ApexMaker Mini 14K 10.1" LCD/MSLA 3D Printer

SKU CH-XJZT-K159Q

MSLA 3D printer with a 10.1-inch 14K monochrome LCD delivering 16.8 µm XY detail and a 224 × 127 × 280 mm build volume

  • Type3D Printer
  • 1-inch 14K mono LCD delivers hair-thin 16.8 µm detail
  • 224 × 127 × 280 mm build volume fits large miniatures
  • Dual Z-axis linear rails keep layers seamless and surfaces smooth
  • Auto resin feed, tank heating and air purification run unattended
  • 8-inch touchscreen works with Chitubox, Lychee and Tango slicers

Precision 14K resin printer

The ApexMaker Mini is a 10.1 inch MSLA 3D printer with a 14K monochrome LCD delivering 13320 x 5120 pixel resolution and 16.8 µm pixel size. Its build volume measures 224 x 127 x 280 mm for detailed models. Automatic resin feeding, tank heating and an air purification system support consistent prints. A 5.8 inch touchscreen controls the unit.

Tabletop and prototype makers

Hobbyists producing miniatures, jewellery prototypes or small functional parts benefit from the high XY detail and stable dual Z-axis. Users needing larger single-part prints or filament-based FDM printing should consider other technologies. The 500 W power draw requires a suitable outlet.

16.8 µm pixel size

This XY resolution determines the finest feature the printer can reproduce. If your application demands detail at or below this scale the ApexMaker Mini matches the requirement; if coarser detail is acceptable a lower-resolution printer may suffice.

特長

  • 1-inch 14K mono LCD delivers hair-thin 16.8 µm detail
  • 224 × 127 × 280 mm build volume fits large miniatures
  • Dual Z-axis linear rails keep layers seamless and surfaces smooth
  • Auto resin feed, tank heating and air purification run unattended
  • 8-inch touchscreen works with Chitubox, Lychee and Tango slicers

仕様

Type3D Printer

この商品に関する質問

Will the 224 x 127 x 280 mm build volume fit on my existing wash-and-cure station?

The build platform measures 224 mm wide by 127 mm deep, so compare those dimensions with your station's basket size before buying.

How can I confirm the 16.8 µm XY resolution is delivering the detail shown in the specs?

Print a calibration model with fine features; the 10.1 inch 14K mono screen should resolve hair-thin details at the stated 16.8 µm pixel pitch.

Does the box include resin or a wash-and-cure unit, or must I buy them separately?

The printer ships with the 10.1 inch 14K mono screen, automatic resin feeding, heated vat and touchscreen; UV resin and post-processing hardware are sold separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。