暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Cisco Systems, Inc.

Cisco Systems, Inc. PWR-C1-715WAC-P= 715 W server power supply

SKU CH-NQ4Q-9TXGD MPN PWR-C1-715WAC-P=

Delivers 715 watt AC power with 80 Plus Platinum efficiency, weighing 3.59 lbs

  • 715 W output powers demanding server workloads
  • 80 Plus Platinum efficiency reduces energy waste and heat
  • 59 lb lightweight design eases rack installation
  • Hot-plug capable for zero-downtime maintenance
  • Redundant-ready architecture supports high-availability deployments

715 W AC Server Power Supply

This 715 watt AC power supply is built for Cisco server chassis that accept the Configuration 1 form factor. It delivers 80 Plus Platinum efficiency for data-centre and enterprise deployments. The unit weighs 3.59 lbs and ships new as a spare or replacement module.

Replaces Failed or Lower-Capacity Units

It serves as a direct swap for a failed Configuration 1 supply or as an upgrade where the original chassis shipped with a lower-wattage module. The jump is worth it when the server load approaches the prior supply’s limit or when platinum efficiency reduces operating cost over time.

Platinum Efficiency and Form-Factor Limits

The 80 Plus Platinum rating sets the practical efficiency floor across typical load ranges. The Configuration 1 mechanical keying prevents installation in chassis wired for other Cisco supply types. No other interface or protocol constraints are defined by the supplied data.

特長

  • 715 W output powers demanding server workloads
  • 80 Plus Platinum efficiency reduces energy waste and heat
  • 59 lb lightweight design eases rack installation
  • Hot-plug capable for zero-downtime maintenance
  • Redundant-ready architecture supports high-availability deployments

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What chassis or slot does the 715 W unit slide into?

It is a Configuration1 hot-plug module designed for Cisco Catalyst and Nexus switches that accept the same form factor.

How do you install the PWR-C1-715WAC-P= without triggering a power fault?

Insert the supply until the latch clicks, then verify the green input and output LEDs are both solid before applying load.

When should the 3.59 lb supply be swapped out under normal use?

Replace it when the status LED turns amber or the switch logs a power-supply degradation alert.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。