暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Grey thermal paste in a silver 20g can with coxbyte TG-30 branding

coxbyte

coxbyte TG-30 thermal paste 17.5W/mK 20g

SKU CH-4P05-81MS6

High-conductivity 17.5 W/mK paste in a 20 g can for CPU, GPU and LED cooling from -50 °C to 250 °C

  • Volume / Net Weight20g
  • Thermal Conductivity17.5 W/mK
  • Long Term Operating Temperature-50 to 250 C
  • SpecificationsTG-30 adopts an improved nanocarbon tube composite formula w
  • High 17.5 W/mK conductivity cuts CPU/GPU temperatures fast
  • Non-conductive formula removes short-circuit risk during application
  • Stable from -50 °C to 250 °C without evaporating
  • Less than 3 % performance loss over five years
  • Smooth silicone gel spreads evenly in thin layer

Premium thermal compound for high-heat components

Coxbyte TG-30 thermal paste delivers 17.5 W/mK conductivity in a 20 g can. The non-conductive silicone formula suits CPUs, GPUs, gaming laptops and LED modules. It operates from -50 °C to 250 °C without evaporating. Designed for enthusiasts who need reliable heat transfer under sustained loads.

Replaces standard pastes when temperatures stay high

Upgrading is worthwhile if stock or basic compound leaves cores running hot during gaming or rendering. The nanocarbon composite cuts the core-to-cooler delta by more than 20 °C in typical use. Degradation stays below 3 % over five years, so re-application intervals are longer. Not for builders who only need a basic paste for light office workloads.

Verify cooler mounting pressure

Ensure the heatsink makes even contact; uneven pressure traps air bubbles regardless of paste quality. Clean old compound fully with isopropyl alcohol before applying the centre-dot method. The target layer thickness matches a sheet of A4 paper. No electrical conductivity risk, but avoid excess squeeze-out near socket pins.

特長

  • High 17.5 W/mK conductivity cuts CPU/GPU temperatures fast
  • Non-conductive formula removes short-circuit risk during application
  • Stable from -50 °C to 250 °C without evaporating
  • Less than 3 % performance loss over five years
  • Smooth silicone gel spreads evenly in thin layer

仕様

Brandcoxbyte
SeriesTG
Model30
Volume / Net Weight20g
Thermal Conductivity17.5 W/mK
Long Term Operating Temperature-50 to 250 C
SpecificationsTG-30 adopts an improved nanocarbon tube composite formula with a thermal conductivity of 17.5W/mK (measured value), which can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming consoles, high-performance graphics cards, and workstations. Its non-conductive properties completely avoid the risk of short circuit, with good viscosity optimization. Single point or nine point coating can be extended to a uniform thermal conductive layer with a thickness of 0.15mm, improving operational convenience by 15%. After curing, the tempe

この商品に関する質問

What size surface area does the 20g can cover?

The 20g canned paste is sufficient for multiple CPU or GPU applications; apply a layer roughly the thickness of an A4 sheet on each die.

How do I apply the TG-30 paste correctly?

Clean the die, place a dot of paste at the centre, then spread it evenly with a scraper until the layer matches the thickness of an A4 paper.

How long before the thermal performance degrades?

Performance loss stays under 3 % over five years; the compound remains stable from -50 °C to 250 °C without evaporating.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。