저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Grey thermal paste in a silver 20g can with coxbyte TG-30 branding

coxbyte

coxbyte TG-30 thermal paste 17.5W/mK 20g

SKU CH-4P05-81MS6

High-conductivity 17.5 W/mK paste in a 20 g can for CPU, GPU and LED cooling from -50 °C to 250 °C

  • Volume / Net Weight20g
  • Thermal Conductivity17.5 W/mK
  • Long Term Operating Temperature-50 to 250 C
  • SpecificationsTG-30 adopts an improved nanocarbon tube composite formula w
  • High 17.5 W/mK conductivity cuts CPU/GPU temperatures fast
  • Non-conductive formula removes short-circuit risk during application
  • Stable from -50 °C to 250 °C without evaporating
  • Less than 3 % performance loss over five years
  • Smooth silicone gel spreads evenly in thin layer

Premium thermal compound for high-heat components

Coxbyte TG-30 thermal paste delivers 17.5 W/mK conductivity in a 20 g can. The non-conductive silicone formula suits CPUs, GPUs, gaming laptops and LED modules. It operates from -50 °C to 250 °C without evaporating. Designed for enthusiasts who need reliable heat transfer under sustained loads.

Replaces standard pastes when temperatures stay high

Upgrading is worthwhile if stock or basic compound leaves cores running hot during gaming or rendering. The nanocarbon composite cuts the core-to-cooler delta by more than 20 °C in typical use. Degradation stays below 3 % over five years, so re-application intervals are longer. Not for builders who only need a basic paste for light office workloads.

Verify cooler mounting pressure

Ensure the heatsink makes even contact; uneven pressure traps air bubbles regardless of paste quality. Clean old compound fully with isopropyl alcohol before applying the centre-dot method. The target layer thickness matches a sheet of A4 paper. No electrical conductivity risk, but avoid excess squeeze-out near socket pins.

주요 특징

  • High 17.5 W/mK conductivity cuts CPU/GPU temperatures fast
  • Non-conductive formula removes short-circuit risk during application
  • Stable from -50 °C to 250 °C without evaporating
  • Less than 3 % performance loss over five years
  • Smooth silicone gel spreads evenly in thin layer

사양

Brandcoxbyte
SeriesTG
Model30
Volume / Net Weight20g
Thermal Conductivity17.5 W/mK
Long Term Operating Temperature-50 to 250 C
SpecificationsTG-30 adopts an improved nanocarbon tube composite formula with a thermal conductivity of 17.5W/mK (measured value), which can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming consoles, high-performance graphics cards, and workstations. Its non-conductive properties completely avoid the risk of short circuit, with good viscosity optimization. Single point or nine point coating can be extended to a uniform thermal conductive layer with a thickness of 0.15mm, improving operational convenience by 15%. After curing, the tempe

이 상품에 대한 질문

What size surface area does the 20g can cover?

The 20g canned paste is sufficient for multiple CPU or GPU applications; apply a layer roughly the thickness of an A4 sheet on each die.

How do I apply the TG-30 paste correctly?

Clean the die, place a dot of paste at the centre, then spread it evenly with a scraper until the layer matches the thickness of an A4 paper.

How long before the thermal performance degrades?

Performance loss stays under 3 % over five years; the compound remains stable from -50 °C to 250 °C without evaporating.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.