暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three rectangular LED modules with USB cable and small remote control

CreatryLab 3 Pack RGB LED Lamp Kit 16T 16 Colors Remote Memory USB 5V 1.5m Cable 7.8x5.5x1.6in

SKU CH-5GDA-K3DQM

Three RGB LED lamp modules with 16 colours, 24-key IR remote, memory recall and 1.5 m USB 5 V cables fit standard 3D-printed light boxes

  • ColorRGB 16 Colors
  • Compatible SystemWindows 7
  • Specification7.8 L x 5.5 W x 1.6 H inches, RGB 16 Colors, 16T
  • FeaturesPersonal Computer
  • Smart memory retains last colour and brightness settings
  • 24-key IR remote selects 16 static colours and 4 dynamic modes
  • Tailored for Bambu Lab X1/P1/A1 and MakerWorld light-box projects
  • Plug-and-play USB 5V power with 1.5m cable fits printer ports or power banks
  • Compact 7.8 x 5.5 x 1.6 in modules install without soldering

Tailored Lighting for 3D Prints

This three-pack RGB LED lamp kit is designed for 3D printed light boxes, lithophanes and MakerWorld hardware projects. It suits hobbyists who want integrated illumination without soldering or complex wiring. The kit replaces generic strips with a compact, modular form factor built for standard printed enclosures. Power comes from a 5V USB source such as a printer port, power bank or PC.

Plug-and-Play Integration

Each unit connects via a 1.5m USB cable for flexible placement inside tight DIY structures. The 5V interface draws power directly from the printer or any compatible USB port, so no external adapter is required. A 24-key IR remote controls 16 static colours and four dynamic modes, while a smart memory function retains the last colour and brightness setting after power cycles. The kit fits printers including Bambu Lab X1, P1 and A1 series.

Ideal for Enclosure Builders

Makers who need a solder-free, memory-enabled light source for printed enclosures will find this kit straightforward. Builders who require more than three lamps, a different control protocol or a non-USB power input should look at other solutions. The fixed 16-colour palette and IR remote may not suit users wanting app-based or addressable LED control. Dimensions are 7.8 x 5.5 x 1.6 inches per unit.

特長

  • Smart memory retains last colour and brightness settings
  • 24-key IR remote selects 16 static colours and 4 dynamic modes
  • Tailored for Bambu Lab X1/P1/A1 and MakerWorld light-box projects
  • Plug-and-play USB 5V power with 1.5m cable fits printer ports or power banks
  • Compact 7.8 x 5.5 x 1.6 in modules install without soldering

仕様

BrandCreatryLab
Part Number16T
ColorRGB 16 Colors
Compatible SystemWindows 7
Specification7.8 L x 5.5 W x 1.6 H inches, RGB 16 Colors, 16T
FeaturesPersonal Computer

この商品に関する質問

What happens to the memory function if the USB power is interrupted during a long print?

The intelligent memory retains the last colour and brightness setting so the lamp restores your chosen mode when power returns.

How much heat does the kit add inside a closed 3D-printed enclosure after hours of use?

The 5 V USB-powered LEDs run cool, adding only a subtle ambient warmth even during extended operation.

Which USB port on my printer or PC must be free for the 1.5 m cable to reach?

Any standard 5 V USB-A port on a Bambu Lab X1, P1 or A1 series printer, a power bank or a PC will power the kit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。