暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green full-height PCIe card with dual QSFP56 cages and gold edge connector

DELL

DELL E2100-CCQDA2 200GbE Dual-Port QSFP56 PCIe 4.0 x16 IPU Network Card

SKU CH-P5J9-061K7 MPN E2100-CCQDA2

Dual-port 200GbE IPU adapter with QSFP56 connectors on a PCIe 4.0 x16 interface

  • Offloads networking and storage tasks with Intel IPU architecture
  • Dual QSFP56 ports each deliver 200 Gbps data rate
  • PCIe 4.0 x16 host interface provides high bandwidth
  • 16 lanes enable fast communication with the host CPU
  • Designed for NVMe over Fabrics virtualization workloads

200 Gbps Dual-Port IPU Adapter

The Dell E2100-CCQDA2 is an Infrastructure Processing Unit that delivers 200 Gbps per port through two QSFP56 connectors. It installs in a PCIe 4.0 x16 slot and uses an Intel ASIC-based architecture to offload networking and storage tasks from the host CPU.

Suited for hyperscale and cloud data centres

This card fits environments that need hardware acceleration for software-defined networking and NVMe over Fabrics virtualization. It is not intended for general-purpose servers that only require basic connectivity or for systems lacking a PCIe 4.0 x16 slot.

PCIe 4.0 x16 host interface

The adapter requires a full-length PCIe 4.0 x16 slot to operate at its rated 200 Gbps per port. Verify that the target server provides this exact interface before purchase.

特長

  • Offloads networking and storage tasks with Intel IPU architecture
  • Dual QSFP56 ports each deliver 200 Gbps data rate
  • PCIe 4.0 x16 host interface provides high bandwidth
  • 16 lanes enable fast communication with the host CPU
  • Designed for NVMe over Fabrics virtualization workloads

仕様

BrandDell
ModelE2100-CCQDA2
Part NumberYJDYV

この商品に関する質問

Will the PCIe 4.0 x16 slot in my server provide enough lanes for this adapter to run at 200 Gbps per port?

The adapter is designed for a PCIe 4.0 x16 host interface; the slot must supply 16 lanes at 4.0 speed to achieve the rated 200 Gbps per port.

Can I keep my existing NVMe storage targets while adding this IPU for NVMe-oF acceleration?

The IPU offloads NVMe-oF processing from the host CPU, so current NVMe targets remain accessible while the adapter handles fabric transport.

How do I confirm both QSFP56 ports are negotiating 200 Gbps after installation?

Check the link status LEDs on each port and verify 200 Gbps link speed in the OS network tool or switch management console.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。