暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Slim silver 3D printing pen with OLED screen and ceramic nozzle, 170mm long, 14mm diameter, 41g

DEWANG

DEWANG 3D Printing Pen Silver 1.75mm OLED 170mm 41g

SKU CH-P9E3-HNDXZ

A slim 3D printing pen with OLED display, 1.75 mm filament support, six speed levels and a built-in cooling fan for PLA and ABS

  • Type3D Printing Pen
  • ColorSilver
  • Body MaterialStainless Steel
  • Filament Diameter1.75mm
  • Jets Diameter0.7mm
  • Max Working Speed6 Levels

Color Silver

  • Ultra-slim 1.4 cm diameter fits comfortably in hand
  • Built-in fan freezes filament mid-air for faster solidification
  • Individual motor rated for 103 hours of continuous operation
  • Switch between PLA and ABS modes instantly without restarting
  • Six adjustable speed levels let you match flow to any project

Ultra-Slim 3D Printing Pen for Makers

The DEWANG pen measures 170 mm long with a 14 mm diameter and weighs 41 g. Its stainless-steel body and ceramic nozzle suit hobbyists, students and educators who want a lightweight tool for freehand 3D drawing with 1.75 mm PLA or ABS filament.

OLED Temperature Control

An integrated OLED screen shows the active temperature between 130 and 230 degree. Users can toggle between PLA at 190 degree and ABS at 210 degree without restarting the pen, so material changes do not interrupt a build session.

Six Speed Levels and 103-Hour Motor Life

The internal motor is rated for 103 hours of continuous operation across six adjustable extrusion speeds. Built-in cooling fans solidify filament quickly for mid-air structures, though the 0.7 mm nozzle limits fine detail and the 5 V 2 A input restricts use to USB power banks or adapters.

特長

  • Ultra-slim 1.4 cm diameter fits comfortably in hand
  • Built-in fan freezes filament mid-air for faster solidification
  • Individual motor rated for 103 hours of continuous operation
  • Switch between PLA and ABS modes instantly without restarting
  • Six adjustable speed levels let you match flow to any project

仕様

Type3D Printing Pen
ColorSilver
Body MaterialStainless Steel
Filament Diameter1.75mm
Jets Diameter0.7mm
Max Working Speed6 Levels
Operation TemperatureABS 210?, PLA 190?
Package Contents1 X 3D Printing Pen
1 X Power Adapter
1 X USB Cable
3 X 3 Meters PLA Filaments
1 X Screwdriver
1 X Manual
Dimensions170*14*14mm
Weight41g

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 1.75mm filament diameter mean for the pen's output detail?

The 1.75mm filament feeds through a 0.7mm ceramic nozzle, so the extruded line is thinner than the raw filament, giving finer control for detailed drawing.

How does the USB power input limit where I can use the pen?

It runs on DC 5V 2A, so you can plug it into a power bank, a computer USB port, or the included US-plug adapter for portable or desk use.

Will the 170mm stainless-steel body fit in a standard pen holder or case?

At 170mm long and 14mm wide, the slim metal body fits most pen pots, and the detachable nozzle plus protective cap make it safe to store hot.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。