暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Slender black stainless-steel 3D printing pen with OLED screen, 1.4 cm diameter, 170 mm long, ceramic nozzle, weighs 41 g

DEWANG

DEWANG 3D Printing Pen OLED 1.75mm Black

SKU CH-B6X5-NFT8S

A stainless-steel 3D printing pen with OLED display, ceramic nozzle and six speed levels draws 1.75 mm PLA or ABS filament at up to 230 °C

  • Type3D Printing Pen
  • ColorBlack
  • Body MaterialStainless Steel
  • Filament Diameter1.75mm
  • Jets Diameter0.7mm
  • Max Working Speed6 Levels

Color Black

  • OLED screen shows precise temperature from 130 to 230 degrees
  • six speed levels let you match flow to any project
  • instant PLA/ABS switch without restarting the pen
  • ceramic nozzle and built-in fan cool filament fast for clean lines
  • slim 1.4 cm stainless-steel body weighs just 41 grams

What this pen is and who uses it

The DEWANG 3D Printing Pen is a handheld extrusion tool that melts 1.75mm PLA or ABS filament through a 0.7mm ceramic nozzle. An OLED screen shows the current temperature, which adjusts from 130 to 230 degrees by button. Six speed levels and a built-in fan let you draw free-standing lines in the air.

Who it suits and who should look elsewhere

Makers, students and hobbyists who want instant PLA/ABS switching without restarting the pen will appreciate the on-the-fly mode change. The slim 1.4cm stainless-steel body and 41g weight suit long drawing sessions. Buyers needing a full build-volume 3D printer or multi-material support should look elsewhere.

Capacity and headroom

The pen handles standard 1.75mm PLA at 190 degrees and ABS at 210 degrees, with a motor rated for 103 hours of continuous use. Three included 3-metre PLA spools provide starter filament. The fixed 0.7mm nozzle limits fine detail, and the DC 5V 2A input restricts operation to power banks, adapters or USB ports.

特長

  • OLED screen shows precise temperature from 130 to 230 degrees
  • six speed levels let you match flow to any project
  • instant PLA/ABS switch without restarting the pen
  • ceramic nozzle and built-in fan cool filament fast for clean lines
  • slim 1.4 cm stainless-steel body weighs just 41 grams

仕様

Type3D Printing Pen
ColorBlack
Body MaterialStainless Steel
Filament Diameter1.75mm
Jets Diameter0.7mm
Max Working Speed6 Levels
Operation TemperatureABS 210?, PLA 190?
Package Contents1 X 3D Printing Pen
1 X Power Adapter
1 X USB Cable
3 X 3 Meters PLA Filaments
1 X Screwdriver
1 X Manual
Dimensions170*14*14mm
Weight41g

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What power source does the DEWANG 3D Printing Pen require?

The pen runs on DC 5V 2A input and can be powered by the included USB cable from a power bank, computer USB port, or the supplied US-plug adapter.

Can I use the 1.75 mm PLA and ABS filaments I already have with this pen?

Yes — the pen accepts standard 1.75 mm PLA and ABS filament, and you can switch between the two materials at any time without restarting the device.

How do I confirm the pen is heating correctly after I turn it on?

The OLED screen shows the live nozzle temperature; when it reaches 190 °C for PLA or 210 °C for ABS the pen is ready to extrude.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。