نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Slender black stainless-steel 3D printing pen with OLED screen, 1.4 cm diameter, 170 mm long, ceramic nozzle, weighs 41 g

DEWANG

DEWANG 3D Printing Pen OLED 1.75mm Black

SKU CH-B6X5-NFT8S

A stainless-steel 3D printing pen with OLED display, ceramic nozzle and six speed levels draws 1.75 mm PLA or ABS filament at up to 230 °C

  • Type3D Printing Pen
  • ColorBlack
  • Body MaterialStainless Steel
  • Filament Diameter1.75mm
  • Jets Diameter0.7mm
  • Max Working Speed6 Levels

Color Black

  • OLED screen shows precise temperature from 130 to 230 degrees
  • six speed levels let you match flow to any project
  • instant PLA/ABS switch without restarting the pen
  • ceramic nozzle and built-in fan cool filament fast for clean lines
  • slim 1.4 cm stainless-steel body weighs just 41 grams

What this pen is and who uses it

The DEWANG 3D Printing Pen is a handheld extrusion tool that melts 1.75mm PLA or ABS filament through a 0.7mm ceramic nozzle. An OLED screen shows the current temperature, which adjusts from 130 to 230 degrees by button. Six speed levels and a built-in fan let you draw free-standing lines in the air.

Who it suits and who should look elsewhere

Makers, students and hobbyists who want instant PLA/ABS switching without restarting the pen will appreciate the on-the-fly mode change. The slim 1.4cm stainless-steel body and 41g weight suit long drawing sessions. Buyers needing a full build-volume 3D printer or multi-material support should look elsewhere.

Capacity and headroom

The pen handles standard 1.75mm PLA at 190 degrees and ABS at 210 degrees, with a motor rated for 103 hours of continuous use. Three included 3-metre PLA spools provide starter filament. The fixed 0.7mm nozzle limits fine detail, and the DC 5V 2A input restricts operation to power banks, adapters or USB ports.

أبرز المميزات

  • OLED screen shows precise temperature from 130 to 230 degrees
  • six speed levels let you match flow to any project
  • instant PLA/ABS switch without restarting the pen
  • ceramic nozzle and built-in fan cool filament fast for clean lines
  • slim 1.4 cm stainless-steel body weighs just 41 grams

المواصفات

Type3D Printing Pen
ColorBlack
Body MaterialStainless Steel
Filament Diameter1.75mm
Jets Diameter0.7mm
Max Working Speed6 Levels
Operation TemperatureABS 210?, PLA 190?
Package Contents1 X 3D Printing Pen
1 X Power Adapter
1 X USB Cable
3 X 3 Meters PLA Filaments
1 X Screwdriver
1 X Manual
Dimensions170*14*14mm
Weight41g

إصدارات أخرى من هذا الطراز

3 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What power source does the DEWANG 3D Printing Pen require?

The pen runs on DC 5V 2A input and can be powered by the included USB cable from a power bank, computer USB port, or the supplied US-plug adapter.

Can I use the 1.75 mm PLA and ABS filaments I already have with this pen?

Yes — the pen accepts standard 1.75 mm PLA and ABS filament, and you can switch between the two materials at any time without restarting the device.

How do I confirm the pen is heating correctly after I turn it on?

The OLED screen shows the live nozzle temperature; when it reaches 190 °C for PLA or 210 °C for ABS the pen is ready to extrude.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.