暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Clear 1.75mm filament spool, 750g, glossy transparent finish

E3D Online

E3D Online spoolWorks EDGE Filament 1.75mm 750g Clear Crystal01

SKU CH-M125-5EPJB

A tough, recyclable PETG-based filament that prints with low warp, minimal odour and strong layer adhesion

  • TypeFilament
  • Recyclable PETG-based material reduces environmental impact
  • Prints without unpleasant fumes or odours for a better workspace
  • Strong, tough and naturally glossy finish produces durable, shiny parts
  • Adheres to bed surfaces with only a little gluestick for easier first layers
  • Works with Scaffold support material for reliable adhesion and clean breakaway

Edge filament for reliable everyday printing

This 1.75mm PETG-based Edge filament comes on a 750g spool and is aimed at makers who want strong, accurate parts without the warping or fumes often associated with ABS. It suits hobbyists and small workshops printing functional prototypes, jigs or end-use models that must hold together under load.

Low contraction keeps dimensions steady over long

Edge is engineered with super-low contraction so large or tall builds stay true to size layer after layer. Managed viscosity and melt strength let you run demanding overhangs and tight bridges without constant babysitting, while molecular-level layer adhesion means Z-strength approaches XY-strength even on extended jobs.

Odour-free printing with modest bed prep

The material prints with no unpleasant fumes or odours, making it practical for shared or home spaces. A light gluestick coating is enough for solid first-layer grip, and pairing with Scaffold support material gives clean breakaway on complex geometry. Recyclable PETG base reduces waste when spools are finished.

特長

  • Recyclable PETG-based material reduces environmental impact
  • Prints without unpleasant fumes or odours for a better workspace
  • Strong, tough and naturally glossy finish produces durable, shiny parts
  • Adheres to bed surfaces with only a little gluestick for easier first layers
  • Works with Scaffold support material for reliable adhesion and clean breakaway

仕様

ModelEdge
TypeFilament

この商品に関する質問

Does the filament give off any fumes or odours when the printer runs continuously?

The supplier states it prints with no unpleasant fumes or odours, making it suitable for long sessions in shared spaces.

What printer specification must I already have to use this 1.75mm spool?

Your 3D printer must accept 1.75mm diameter filament; the spool weighs 750g and fits standard holders.

Will this PETG-based material bond reliably to the older heated bed on my current machine?

It adheres effectively to common bed surfaces with just a little gluestick, so older heated beds work well.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。