暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Spool of bright yellow 3D printer filament, 2.85mm diameter, 750g net weight

E3D Online

E3D Online spoolWorks EDGE Filament 2.85mm 750g Limey Lime29 3d printers accessory

SKU CH-7Z7E-WH8AK

A recyclable PETG-based filament combining ABS toughness with PLA ease of use, low warp, strong layer adhesion and clean breakaway support pairing in 2.85 mm, 750 g lime yellow

  • ColorYellow
  • TypeFilament
  • Easy printing with no unpleasant fumes or odours
  • Strong, tough material with a naturally glossy finish
  • Low warp for accurate overhangs and tight bridges
  • Adheres to beds with just a little gluestick
  • Pairs with Scaffold support for clean breakaway

Filament Diameter and Weight

E3D Online spoolWorks EDGE is a PETG-based filament supplied as a 2.85 mm spool weighing 750 g in the Limey Lime29 colour. It is engineered for makers who want a strong, stiff material that prints with low warp and minimal odour.

Who This Suits and Who Should Look Elsewhere

It suits users printing functional parts that need high layer adhesion and toughness comparable to ABS but with easier bed adhesion using only a light gluestick coating. It is not for printers that cannot accept 2.85 mm stock, nor for applications requiring flexible, high-temperature or water-soluble filaments.

Recyclable PETG-Based Composition

The filament uses a modified PETG formulation that is widely recyclable while delivering exceptional resilience and a naturally glossy finish. This single material choice determines whether the mechanical properties and environmental profile match the project requirements.

特長

  • Easy printing with no unpleasant fumes or odours
  • Strong, tough material with a naturally glossy finish
  • Low warp for accurate overhangs and tight bridges
  • Adheres to beds with just a little gluestick
  • Pairs with Scaffold support for clean breakaway

仕様

BrandE3D
ModelEdge
ColorYellow
TypeFilament

この商品に関する質問

How does the 2.85 mm diameter behave once it is loaded into a real machine?

The 2.85 mm filament feeds smoothly through standard Bowden or direct-drive extruders and melts consistently for reliable layer bonding.

What interface or standard governs this spool, and what does it limit in practice?

The spool follows the common 2.85 mm diameter standard used by many desktop printers, so it fits any machine designed for that size.

What does the 750 g spool physically need to fit or mount on a printer?

The 750 g spool mounts on any standard filament holder that accepts a typical hub diameter and spool width.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。