暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
22-piece nozzle cleaning kit with 1.5mm clog poke 20 needles and wire brush

EILKBLA 22Pcs 3D Printer Nozzle Cleaning Kit 1.5mm Clog Remover Tool

SKU CH-A3C9-AJ76W

A 22-piece kit with a 1.5mm clog poke for 1.75mm filament, 20 precision 0.4mm needles, and a wire brush to clear jams and maintain nozzles on most FDM printers

  • Typeno clogger 3d printer tool
  • Clears hotend jams without disassembly using the 1.5mm clog poke for 1.75mm filament
  • Restores smooth extrusion with 20 precision 0.4mm needles for 0.4mm nozzles
  • Prevents buildup on nozzle tip and heater block with the included wire brush
  • Fits most FDM printers with the 1.5mm poke and brush; needles match 0.4mm nozzles
  • Complete 22-piece kit covers clog removal, fine debris cleaning and regular maintenance

22-piece nozzle cleaning kit

This 22-piece nozzle cleaning kit provides essential tools for clearing filament jams and residue on FDM 3D printers. It is designed for hobbyists and professionals who want reliable maintenance without disassembling the hotend.

1.5 mm clog poke and 0.4 mm needles

The 1.5 mm clog poke pushes out stuck 1.75 mm filament directly through the nozzle opening, avoiding teardown time. Twenty 0.4 mm needles target fine debris inside 0.4 mm nozzles, while the wire brush scrubs the nozzle tip and heater block to prevent buildup.

0.4 mm needle diameter for 0.4 mm nozzles

The 0.4 mm cleaning needles match standard 0.4 mm nozzles, making this the deciding specification for compatibility. Printers with different nozzle diameters will need alternative needle sizes not included in this kit.

特長

  • Clears hotend jams without disassembly using the 1.5mm clog poke for 1.75mm filament
  • Restores smooth extrusion with 20 precision 0.4mm needles for 0.4mm nozzles
  • Prevents buildup on nozzle tip and heater block with the included wire brush
  • Fits most FDM printers with the 1.5mm poke and brush; needles match 0.4mm nozzles
  • Complete 22-piece kit covers clog removal, fine debris cleaning and regular maintenance

仕様

BrandEILKBLA
Modelno clogger 3d printer tool
Part Numberno clogger 3d printer tool
Typeno clogger 3d printer tool

この商品に関する質問

How often will I need to replace the 0.4 mm cleaning needles in this 22-piece kit?

The kit contains 20 needles at 0.4 mm diameter; they are consumable items that wear or bend with repeated use, so keep spares on hand and replace individual needles whenever the tip deforms or no longer passes cleanly through the nozzle.

What is the first limitation I will hit when clearing a badly clogged 0.4 mm nozzle with these tools?

The 0.4 mm needles match the nozzle bore exactly, so they cannot pass through openings smaller than 0.4 mm; if the blockage is harder than the needle or the nozzle interior is damaged, the needle will stop or break before the jam clears.

Does the 1.5 mm clog poke generate heat or require power during extended cleaning sessions?

No, the 1.5 mm clog poke is a simple unpowered metal tool that you insert by hand into a heated hot-end for 1.75 mm filament; it produces no heat or noise of its own and draws no electricity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。