暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 3.5 inch internal card reader with three slots and a 1.64ft cable

EN-Labs

EN-Labs EXTERU3CR3 3.5" Internal Card Reader USB 3.2 Gen 1 1.64ft Cable

SKU CH-RSVB-3Z792

Internal 3.5" bay card reader adds SD, CompactFlash, Memory Stick and xD slots via USB 3.2 Gen 1 header with 1.64ft cable

  • TypeAll-in-one
  • Slots3
  • Installation TypeInternal
  • ColorBlack
  • InterfaceUSB 3.0 w/cable
  • Support - Compact FlashYes
  • 5 Gbps transfer speed via USB 3.2 Gen 1 interface
  • Reads CF I/II, SD, MS Pro/Duo and xD cards
  • Fits standard 3.5" floppy bay for internal installation
  • 64ft cable reaches motherboard USB 19-pin header
  • Compatible with HP Z240 Z440 Z640 Z840 desktops

3.5" Internal Card Reader USB 3.2 Gen 1

The EN-Labs EXTERU3CR3 installs into a 3.5" floppy bay and connects to an internal USB 19-pin header. It provides three slots for CompactFlash I/II, Memory Stick variants and SD/SDHC/SDXC/UHS-I/II cards. A 1.64ft cable links the reader to the motherboard header.

Suits desktops with a free 3.5" bay

Photographers and office users who transfer images from CF, MS or SD media will find the all-in-one layout convenient. Builders without a spare 3.5" bay or an available internal USB 19-pin header cannot install this unit. It does not support MMC or SmartMedia formats.

Fits a 3.5" front panel opening

The 1.64ft cable reaches headers on boards used in HP Z240, Z440, Z640 and Z840 workstations. Using the reader frees external USB ports for other peripherals while adding multi-format card access directly at the front of the chassis.

特長

  • 5 Gbps transfer speed via USB 3.2 Gen 1 interface
  • Reads CF I/II, SD, MS Pro/Duo and xD cards
  • Fits standard 3.5" floppy bay for internal installation
  • 64ft cable reaches motherboard USB 19-pin header
  • Compatible with HP Z240 Z440 Z640 Z840 desktops

仕様

BrandEN-Labs
ModelEXTERU3CR3
TypeAll-in-one
Slots3
Installation TypeInternal
ColorBlack
InterfaceUSB 3.0 w/cable
Support - Compact FlashYes
Support - Memory StickYes
Support - MMCNo
Support - SDYes
Support - SmartMediaNo
Support - xDYes

この商品に関する質問

Do I need a free 19-pin USB header on the motherboard to install this EXTERU3CR3?

Yes, the reader connects through an internal USB 19-pin header; the 1.64ft cable reaches from a 3.5" bay to that header.

Will the CF I/II and SD UHS-I/II slots work if I keep an older USB 3.0 front-panel port on the same header?

The reader runs at USB 3.2 Gen 1 5Gbps; sharing a header with legacy USB 3.0 devices will fall back to the slower link speed.

How can I confirm the reader is operating at 5Gbps after fitting it in a Z240, Z440, Z640 or Z840 bay?

In Device Manager the device should appear as a USB 3.2 Gen 1 controller and transfer rates on a UHS-II card will approach the 5Gbps link ceiling.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。