暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Bare 2.5 inch SATA SSD with silver metal casing

HPE

HP 868930-001 1.92TB SATA 2.5" internal SSD

SKU CH-0NXC-4096C

A 1.92TB 2.5-inch SATA solid-state drive for read-intensive server workloads

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Average Latency6Gb/s
  • Form Factor2.5"
  • 92TB capacity stores large datasets
  • SATA 6.0Gb/s interface enables fast data transfer
  • 5-inch form factor fits standard drive bays
  • Read-intensive design suits mixed-use workloads
  • Digitally signed firmware protects data integrity

HP 1.92TB SATA 2.5" internal SSD

This HP 868930-001 solid-state drive provides 1.92TB of storage over a SATA 6.0Gb/s interface in a 2.5-inch form factor. It is built for read-intensive workloads inside HPE ProLiant Gen9 and Gen10 servers. The drive uses MLC NAND and includes digitally signed firmware for supply-chain integrity. Hot-plug capability allows insertion or removal without powering down the chassis.

Suited for read-heavy server workloads

The drive targets administrators who need high-capacity, read-optimised storage for boot, logging or caching tasks in compatible HPE servers. Buyers who require write-intensive endurance for databases or mixed OLTP workloads should evaluate drives rated for higher drive writes per day. Systems lacking a SATA 6.0Gb/s backplane or the specific ProLiant Gen9 and Gen10 drive carriers cannot use this module.

SATA 6.0Gb/s interface and 2.5-inch SFF

The single specification that decides fitment is the SATA 6.0Gb/s interface combined with the 2.5-inch small form factor and the HPE-specific hot-plug carrier. Only servers that accept this exact physical and electrical interface — specifically HPE ProLiant Gen9 and Gen10 models — will recognise and operate the drive correctly.

特長

  • 92TB capacity stores large datasets
  • SATA 6.0Gb/s interface enables fast data transfer
  • 5-inch form factor fits standard drive bays
  • Read-intensive design suits mixed-use workloads
  • Digitally signed firmware protects data integrity

仕様

BrandHP
Model868930-001
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Average Latency6Gb/s
Form Factor2.5"

この商品に関する質問

Will the 868930-001 work with my older SATA 3.0Gb/s backplane?

The drive uses the SATA 6.0Gb/s interface and is backward compatible with 3.0Gb/s controllers, so it will operate at the lower speed on older backplanes.

How can I verify the 1.92TB drive is healthy after installation?

Check the drive status in the ProLiant Smart Storage Administrator or the server BIOS; both report SMART data and firmware version for this model.

The listing says bare drive — what exactly ships and what must I supply?

You receive the 2.5 inch SSD only; a drive carrier, mounting screws and SATA cables are not included and must be sourced separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。