暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch SAS hard drive with green circuit board

HP

HP EG1800JEHMD 1.8TB 10000RPM SAS 2.5" internal hard drive

SKU CH-0ZE7-VYBTH

A 1.8 TB SAS hard drive spinning at 10000 RPM in a 2.5 inch form factor

  • InterfaceSAS
  • Capacity1.8TB
  • NAND Flash Memory TypeSLC
  • RPM10000 RPM
  • Form Factor2.5"
  • 8TB capacity stores large datasets
  • 10000 RPM spindle speed accelerates data access
  • SAS interface delivers 12Gb/s throughput
  • 5-inch form factor fits dense server bays
  • SLC NAND flash enhances write endurance

HP 1.8 TB SAS 10K drive

The HP EG1800JEHMD is a 1.8 TB, 2.5-inch enterprise hard drive that spins at 10 000 RPM and connects through a SAS interface. It uses SLC NAND flash memory for consistent write endurance in demanding workloads. The drive is supplied new in retail or OEM packaging.

Suited for servers and storage arrays

This drive fits 2.5-inch bays in servers or external arrays that require a 12 Gb/s SAS connection and 10 000 RPM performance. It is not for buyers who need a larger capacity per bay, silent desktop operation or a different interface.

12 Gb/s SAS interface

The single specification that decides compatibility is the 12 Gb/s SAS interface; the host controller or backplane must support this speed and protocol for the drive to function correctly.

特長

  • 8TB capacity stores large datasets
  • 10000 RPM spindle speed accelerates data access
  • SAS interface delivers 12Gb/s throughput
  • 5-inch form factor fits dense server bays
  • SLC NAND flash enhances write endurance

仕様

InterfaceSAS
Capacity1.8TB
NAND Flash Memory TypeSLC
RPM10000 RPM
Form Factor2.5"

この商品に関する質問

Do I need a SAS host bus adapter or RAID controller with a 12 Gb/s port to use this drive?

Yes, the drive uses a SAS interface and supports 12 Gb/s speeds, so the controller must provide a SAS port running at that rate.

Will this 2.5" 10000 RPM SAS drive share a backplane with older 6 Gb/s SAS drives?

It uses the standard SAS interface, so it can operate on the same backplane; the link will negotiate down to 6 Gb/s for the older drives while this drive runs at 12 Gb/s.

How can I confirm the drive is running at its rated 10000 RPM and 12 Gb/s link speed after installation?

Check the controller BIOS or management utility; it should report the negotiated link speed as 12 Gb/s and the drive model EG1800JEHMD with a 10000 RPM spindle speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。