HP
HP EG1800JEHMD 1.8TB 10000RPM SAS 2.5" internal hard drive
A 1.8 TB SAS hard drive spinning at 10000 RPM in a 2.5 inch form factor
- InterfaceSAS
- Capacity1.8TB
- NAND Flash Memory TypeSLC
- RPM10000 RPM
- Form Factor2.5"
- 8TB capacity stores large datasets
- 10000 RPM spindle speed accelerates data access
- SAS interface delivers 12Gb/s throughput
- 5-inch form factor fits dense server bays
- SLC NAND flash enhances write endurance
HP 1.8 TB SAS 10K drive
The HP EG1800JEHMD is a 1.8 TB, 2.5-inch enterprise hard drive that spins at 10 000 RPM and connects through a SAS interface. It uses SLC NAND flash memory for consistent write endurance in demanding workloads. The drive is supplied new in retail or OEM packaging.
Suited for servers and storage arrays
This drive fits 2.5-inch bays in servers or external arrays that require a 12 Gb/s SAS connection and 10 000 RPM performance. It is not for buyers who need a larger capacity per bay, silent desktop operation or a different interface.
12 Gb/s SAS interface
The single specification that decides compatibility is the 12 Gb/s SAS interface; the host controller or backplane must support this speed and protocol for the drive to function correctly.
Puntos fuertes
- 8TB capacity stores large datasets
- 10000 RPM spindle speed accelerates data access
- SAS interface delivers 12Gb/s throughput
- 5-inch form factor fits dense server bays
- SLC NAND flash enhances write endurance
Especificaciones
| Interface | SAS |
|---|---|
| Capacity | 1.8TB |
| NAND Flash Memory Type | SLC |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
Preguntas sobre este artículo
Do I need a SAS host bus adapter or RAID controller with a 12 Gb/s port to use this drive?
Yes, the drive uses a SAS interface and supports 12 Gb/s speeds, so the controller must provide a SAS port running at that rate.
Will this 2.5" 10000 RPM SAS drive share a backplane with older 6 Gb/s SAS drives?
It uses the standard SAS interface, so it can operate on the same backplane; the link will negotiate down to 6 Gb/s for the older drives while this drive runs at 12 Gb/s.
How can I confirm the drive is running at its rated 10000 RPM and 12 Gb/s link speed after installation?
Check the controller BIOS or management utility; it should report the negotiated link speed as 12 Gb/s and the drive model EG1800JEHMD with a 10000 RPM spindle speed.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Western Digital G-DRIVE ArmorATD 5TB portable hard drive SDPH81G005TGBA1D
OWC Gemini Ultra X6 12TB Thunderbolt portable SSD (OWCTB3GMA6X12)
- 12TB
- Thunderbolt



