我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

HP

HP EG1800JEHMD 1.8TB 10000RPM SAS 2.5" internal hard drive

SKU CH-0ZE7-VYBTH

A 1.8 TB SAS hard drive spinning at 10000 RPM in a 2.5 inch form factor

  • InterfaceSAS
  • Capacity1.8TB
  • NAND Flash Memory TypeSLC
  • RPM10000 RPM
  • Form Factor2.5"
  • 8TB capacity stores large datasets
  • 10000 RPM spindle speed accelerates data access
  • SAS interface delivers 12Gb/s throughput
  • 5-inch form factor fits dense server bays
  • SLC NAND flash enhances write endurance

HP 1.8 TB SAS 10K drive

The HP EG1800JEHMD is a 1.8 TB, 2.5-inch enterprise hard drive that spins at 10 000 RPM and connects through a SAS interface. It uses SLC NAND flash memory for consistent write endurance in demanding workloads. The drive is supplied new in retail or OEM packaging.

Suited for servers and storage arrays

This drive fits 2.5-inch bays in servers or external arrays that require a 12 Gb/s SAS connection and 10 000 RPM performance. It is not for buyers who need a larger capacity per bay, silent desktop operation or a different interface.

12 Gb/s SAS interface

The single specification that decides compatibility is the 12 Gb/s SAS interface; the host controller or backplane must support this speed and protocol for the drive to function correctly.

商品特色

  • 8TB capacity stores large datasets
  • 10000 RPM spindle speed accelerates data access
  • SAS interface delivers 12Gb/s throughput
  • 5-inch form factor fits dense server bays
  • SLC NAND flash enhances write endurance

商品規格

InterfaceSAS
Capacity1.8TB
NAND Flash Memory TypeSLC
RPM10000 RPM
Form Factor2.5"

商品問答

Do I need a SAS host bus adapter or RAID controller with a 12 Gb/s port to use this drive?

Yes, the drive uses a SAS interface and supports 12 Gb/s speeds, so the controller must provide a SAS port running at that rate.

Will this 2.5" 10000 RPM SAS drive share a backplane with older 6 Gb/s SAS drives?

It uses the standard SAS interface, so it can operate on the same backplane; the link will negotiate down to 6 Gb/s for the older drives while this drive runs at 12 Gb/s.

How can I confirm the drive is running at its rated 10000 RPM and 12 Gb/s link speed after installation?

Check the controller BIOS or management utility; it should report the negotiated link speed as 12 Gb/s and the drive model EG1800JEHMD with a 10000 RPM spindle speed.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。