暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5-inch SATA solid state drive 1.92 TB

HPE

HPE 877788-B21 1.92 TB 2.5" SATA internal solid state drive

SKU CH-TA5N-PVWFN

1.92 TB 2.5-inch SATA internal SSD with 600 MB/s interface for HPE ProLiant XL170r Gen10 server

  • 92 TB capacity stores large datasets
  • SATA 600 interface delivers 6 Gbit/s throughput
  • 5 inch form factor fits standard drive bays
  • Designed for HPE ProLiant XL170r Gen10 servers
  • New condition ensures full manufacturer reliability

HPE 1.92 TB SATA 2.5" server SSD

This HPE solid-state drive delivers 1.92 TB of storage in a 2.5-inch internal form factor. It connects via a SATA interface operating at the SATA/600 standard. The drive is designed for server environments and carries the manufacturer part number 877788-B21.

Suits HPE ProLiant XL170r Gen10 server upgrades

This drive is validated for the HPE ProLiant XL170r Gen10 server, making it a direct fit for that platform. It is not suitable for desktop PCs or laptops that require consumer-grade firmware. Buyers needing wireless connectivity should look elsewhere as this drive has no wireless LAN capability.

SATA/600 interface determines host compatibility

The drive uses the SATA/600 interface standard, so the host system must provide a matching SATA port. This single specification decides whether the drive can be installed and used. Verify that your server backplane or controller supports this interface before purchase.

特長

  • 92 TB capacity stores large datasets
  • SATA 600 interface delivers 6 Gbit/s throughput
  • 5 inch form factor fits standard drive bays
  • Designed for HPE ProLiant XL170r Gen10 servers
  • New condition ensures full manufacturer reliability

仕様

BrandHPE

この商品に関する質問

Does my server need a 2.5" SATA drive bay to install this drive?

Yes, the drive uses a 2.5" form factor and connects through a SATA/600 interface, so a compatible 2.5" SATA bay is required.

Will this 1.92 TB SATA SSD work in an HPE ProLiant XL170r Gen10 server alongside existing mechanical drives?

It is listed as compatible with the HPE ProLiant XL170r Gen10 and uses the standard SATA/600 interface, allowing it to operate alongside other SATA drives in that server.

How can I verify the drive is recognised at full 1.92 TB capacity after installation?

Check the server BIOS or operating system disk management to confirm the drive appears with its full 1.92 TB capacity and reports a SATA/600 link speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。