暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three white 120mm reverse-blade fans with infinite-mirror ARGB rings and hydraulic bearings

Jungle Leopard

Jungle Leopard Prism6 MAX 120mm Reverse Blade ARGB Case Fan White 3-Pack

SKU CH-B7Y4-WWT7R

Three 120 mm reverse-blade ARGB fans with three-sided infinite-mirror lighting, hydraulic bearings and 800-1850 RPM PWM control for adjustable airflow up to 58.36 CFM at 29 dBA

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color White Reverse-3Pack

  • Three-sided infinite-mirror ARGB creates depth with 0.5 mm layered optics
  • Reverse-blade design lets you pair intake and exhaust for balanced airflow
  • Hydraulic bearing runs at 1850 RPM while keeping noise to 29 dBA
  • 36 CFM airflow and 2.07 mmH₂O pressure clear heat from tight builds
  • Silicone shock pads on both sides cut vibration transferred to the chassis

Reverse-blade airflow control

The Jungle Leopard Prism6 MAX is a 120 mm ARGB case fan sold as a white three-pack. Its reverse-blade design lets builders pull or push air in the opposite direction of a standard fan, giving more layout freedom inside the chassis. Hydraulic bearings and double-sided silicone pads keep vibration low while the fan spins between 800 and 1850 RPM.

5 V 3-pin ARGB header required

The fan draws power through a 4-pin PWM connector but the addressable lighting needs a motherboard 5 V 3-pin header. Without that header the LEDs cannot be synchronised and a separate controller box must be added. The magnetic mounting feet simplify installation but do not replace the electrical requirement.

2.07 mmH₂O static pressure

At 1850 RPM the fan delivers 58.36 CFM with 2.07 mmH₂O of static pressure at 29 dBA. That pressure figure decides whether the fan can overcome restrictive radiators or dense mesh panels. Builders chasing higher static pressure for thick radiators will need a different model.

特長

  • Three-sided infinite-mirror ARGB creates depth with 0.5 mm layered optics
  • Reverse-blade design lets you pair intake and exhaust for balanced airflow
  • Hydraulic bearing runs at 1850 RPM while keeping noise to 29 dBA
  • 36 CFM airflow and 2.07 mmH₂O pressure clear heat from tight builds
  • Silicone shock pads on both sides cut vibration transferred to the chassis

仕様

BrandJungle Leopard
SeriesPrism6 MAX
ModelJL Prism6 MAX BK
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM1850RPM
Air Flow58.36CFM
Air Pressure2.07mmH20
Noise Level=29DBA
Power Connector3 / 4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the white reverse-blade 3-pack or one of the other colour and airflow versions?

Pick the white reverse-blade pack when you want intake fans that pull air through a radiator or restrictive front panel; choose a forward-blade version for exhaust positions, and match black or white to your build theme.

What does the 58.36 CFM airflow figure mean once the fans are installed in a case?

At full speed the three fans move up to 58.36 CFM each, giving strong airflow through mesh panels or radiators while the hydraulic bearing keeps noise near 29 dBA.

How does the 5 V 3-pin ARGB connector limit lighting control on my motherboard?

The 5 V 3-pin header lets the board synchronise ARGB effects; if your motherboard lacks that header you will need a separate controller box to manage the lighting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。