SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00502422BTC
在庫あり
KEHIPI
KEHIPI PoE M.2 HAT+ NVME Adapter for Raspberry Pi 5 2230/2242
Adds NVME M.2 2230/2242 storage and 802.3af/at PoE to Raspberry Pi 5 via 16-pin PCIe with 5 V 4.5 A power output
- Boots Raspberry Pi 5 from NVMe SSD via 16-pin PCIe
- Powers Pi and SSD through single Ethernet cable using 802.3af/at PoE
- Delivers up to 4.5 A at 5 V with 25 W total budget
- Accepts 2230 and 2242 M.2 drives for flexible storage choice
- Stackable 40-pin GPIO header keeps expansion options open
NVMe HAT+ for Raspberry Pi 5
The KEHIPI PoE M.2 HAT+ adds a 16-pin PCIe M-key slot to a Raspberry Pi 5, accepting 2230 or 2242 NVMe SSDs. It draws power from the 40-pin GPIO header and includes an EEPROM for automatic board configuration. Makers and embedded engineers can boot the Pi 5 directly from solid-state storage.
Sustained operation with PoE and cooling
The board delivers up to 4.5 A at 5 V, with a combined 12 V and 5 V ceiling of 25 W, while an onboard fan manages thermals during continuous NVMe traffic. Power over Ethernet follows 802.3af/at, supplying both data and power through a single cable so the system remains stable under prolonged I/O load.
Gen2 and Gen3 PCIe limits
The adapter operates in Gen2 or Gen3 mode depending on the installed SSD and Raspberry Pi 5 firmware. Builders needing Gen4 throughput or drives larger than 2242 will find the interface does not support those configurations. No wireless or Bluetooth circuitry is present on the HAT+.
特長
- Boots Raspberry Pi 5 from NVMe SSD via 16-pin PCIe
- Powers Pi and SSD through single Ethernet cable using 802.3af/at PoE
- Delivers up to 4.5 A at 5 V with 25 W total budget
- Accepts 2230 and 2242 M.2 drives for flexible storage choice
- Stackable 40-pin GPIO header keeps expansion options open
仕様
| Brand | waveshare |
|---|---|
| Model | PoE M.2 HAT+ |
| Part Number | PoE M.2 HAT+ |
この商品に関する質問
How much power does the HAT+ fan and PoE circuitry draw when the Raspberry Pi 5 runs continuously?
The board delivers up to 4.5 A at 5 V with a combined 12 V and 5 V limit of 25 W, so sustained load stays within that envelope.
What must I already own to boot from an M.2 drive using this adapter?
A Raspberry Pi 5, a 2230 or 2242 NVME M-key SSD, and a PoE switch or injector compliant with 802.3 af/at.
Will the 40-pin header on this HAT+ still let me stack my older HATs on top?
Yes, the standard 40-pin GPIO stackable header is exposed, so existing HATs can be mounted above this board.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
