暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

KHACHIMO

KHACHIMO IHTAA-16W 16W ATX power supply

SKU CH-FNBT-7WMGC

Compact 16W ATX power supply tested working for reliable low-power system builds

  • TypeATX
  • ATX form factor fits standard cases
  • 16 W output for low-power builds
  • Tested working before shipment
  • Good quality components for reliability
  • First listed by manufacturer March 12, 2024

Low-wattage ATX power supply

The KHACHIMO IHTAA-16W is a 16W ATX power supply intended for systems with extremely low power demands. It provides a basic ATX form factor connection for compatible motherboards and peripherals. The unit is supplied new and has been tested working by the manufacturer.

Suitable for ultra-low-power builds

This supply fits embedded PCs, thin clients or specialised industrial boards that draw minimal current from the ATX connector. It is not for standard desktop motherboards, discrete graphics cards or any configuration where total system draw can exceed the rated output. Builders needing headroom for additional drives or expansion cards should look elsewhere.

16W rated output

The single deciding specification is the 16W maximum power rating. If the complete system — including CPU, memory, storage and all onboard devices — stays within this limit, the unit will deliver the required ATX voltages. If the projected load is higher, a higher-wattage ATX supply must be chosen.

特長

  • ATX form factor fits standard cases
  • 16 W output for low-power builds
  • Tested working before shipment
  • Good quality components for reliability
  • First listed by manufacturer March 12, 2024

仕様

TypeATX

この商品に関する質問

What ATX form factor does the IHTAA-16W use for case mounting?

The IHTAA-16W follows the standard ATX form factor, so it fits any chassis with an ATX power-supply cut-out and four rear mounting holes.

Which power connectors must be seated during installation to avoid a no-post condition?

Connect the 24-pin ATX main connector and the 4-pin or 8-pin CPU power connector firmly until each latch clicks; missing either will prevent the system from starting.

When should the internal fan be cleaned to maintain airflow in the IHTAA-16W?

Use compressed air to clear dust from the fan intake and exhaust every six to twelve months, or sooner in dusty environments, to keep cooling efficient.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。