OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
KHACHIMO
Provides 6V at 12.5A delivering up to 75W for ATX systems
The KHACHIMO LCA75S-6 is a switching power supply delivering 6 volts at 12.5 amps for a total of 75 watts. It follows the ATX form factor and arrives as an original disassembly unit that has been tested working. This unit suits builds or replacements requiring a dedicated 6V rail at this output level.
This supply fits systems designed specifically for a 6V 75W ATX source. Builds needing different voltages, higher wattage, or alternative form factors should look elsewhere. It is not intended for standard multi-rail PC configurations requiring 12V or 5V primary outputs.
| Type | ATX |
|---|
Mount the unit in the case with the four standard ATX screws, connect the 24-pin motherboard cable and any 6 V peripheral leads, then secure all cables away from fans — forgetting the cable tie-down step is the most common oversight.
Dust the intake vents every few months and verify the fan spins freely; the internal electrolytic capacitors will eventually age, so plan on replacing the unit if output voltage drifts or ripple increases.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?