Lay Filaments
Lay Filaments BENDLAY Flex Filament 2.85mm 0.25kg 3D Printers Accessories
Flexible, nearly clear 2.85 mm filament with 96A shore hardness prints at 220–245 °C without stress whitening
- No stress whitening when bent for durable parts
- Shore hardness 96A gives flexibility without softness
- Nearly clear prints from extremely translucent filament
- Low moisture absorption reduces warping versus ABS
- Prints at 220‑245 °C with ±0.1 mm tolerance
Filament for flexible prints
Lay Filaments BENDLAY is a modified Butadiene filament designed for 3D printers that accept 2.85 mm material. It prints at 220 to 245 degC and produces nearly clear parts with high interlayer adhesion. The spool weighs 0.25 kg and offers a shore hardness of 96A for flexible but not soft results. It suits makers who need bendable, watertight objects without the warping common in ABS.
Thermal behaviour and power
The recommended printing range of 220 to 245 degC keeps extrusion stable on most direct-drive and Bowden systems. BENDLAY absorbs far less moisture from the air than ABS, so warping is significantly reduced during normal use. No heated chamber is required and the material does not exhibit stress whitening when bent. Diameter tolerance of ± 0.1 mm helps maintain consistent flow and nozzle pressure.
Build quality and daily use
The filament remains bendable after printing, enabling functional parts such as thin bottles, squeezable toys, straps or shoe soles. Its translucent finish yields nearly clear prints without post-processing. BENDLAY is described as safe for household, food and medical contact, expanding the range of printable items. It serves as a practical alternative to ABS and soft PLA for users who need durability and flexibility in a single material.
特長
- No stress whitening when bent for durable parts
- Shore hardness 96A gives flexibility without softness
- Nearly clear prints from extremely translucent filament
- Low moisture absorption reduces warping versus ABS
- Prints at 220‑245 °C with ±0.1 mm tolerance
仕様
| Brand | Lay Filaments |
|---|
この商品に関する質問
How do I install the 2.85 mm BENDLAY filament and what step causes the most trouble?
Load the spool at 220–245 °C; the common mistake is forcing the flexible filament too fast, which buckles in the Bowden tube.
What maintenance or replacement will the BENDLAY spool need later?
Store the 0.25 kg spool sealed with desiccant; it absorbs far less moisture than ABS, so drying is rarely required.
What limit appears first during a long print with this filament?
The ±0.1 mm diameter tolerance can cause occasional under-extrusion on very long runs before the spool runs out.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
