暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact gray NVMe enclosure with short USB-C cable

MAIWO

MAIWO K1696P M.2 NVMe 10 Gbps Enclosure Gray

SKU CH-DJCK-31VH8

Houses a single M.2 NVMe SSD up to 4 TB and connects via USB 3.2 Gen 2 at 10 Gbps

  • ColorGray
  • TypeEnclosure
  • AC AdapterNo
  • External InterfaceUSB 3.2 Gen 2
  • HDD Count SupportedSingle NVMe SSD
  • Number of Bay1 Bay

External Interface USB 3.2 Gen 2

HDD Supported Single NVMe SSD

  • Single NVMe SSD
  • With Clone

Size M.2 NVME SSD

  • M.2 NVME SSD
  • M.2 SATA&NVMe SSD

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Transfers up to 10 Gbps over USB 3.2 Gen 2
  • Fits M.2 NVMe sizes 2230, 2242, 2260, 2280 and 22110
  • Works with Windows, Mac OS and Linux without drivers
  • Compact 7.87 × 3.93 inch design weighs just .08 lbs
  • Tool-free plug-and-play installation in seconds

Portable NVMe adapter for idle drives

The MAIWO K1696P turns a spare M.2 NVMe SSD into an external drive through a USB 3.2 Gen 2 Type C connection. It accepts single-sided M-key modules in 2230, 2242, 2260, 2280 and 22110 lengths up to 4TB. The gray enclosure weighs .08 lbs and measures 7.87*3.93*1 inch. No AC adapter is required.

Integrated short cable and tool-free slot

A 10 cm captive cable prevents tangling and keeps workspaces tidy. The inline design lets you insert the SSD directly into the M-key slot without screws or a separate enclosure body. Plug-and-play operation works on Windows, Mac OS and Linux with no driver installation. UASP support is included for reduced protocol overhead.

10 Gbps ceiling for large transfers

The USB 3.2 Gen 2 link tops out at 10 Gbps, so sequential reads and writes from fast NVMe media will saturate the bus. SATA-based M.2 drives with B+M keying are not supported, and the single bay cannot accommodate two drives simultaneously. First-time drives must be initialised, partitioned and formatted in the host OS before use.

特長

  • Transfers up to 10 Gbps over USB 3.2 Gen 2
  • Fits M.2 NVMe sizes 2230, 2242, 2260, 2280 and 22110
  • Works with Windows, Mac OS and Linux without drivers
  • Compact 7.87 × 3.93 inch design weighs just .08 lbs
  • Tool-free plug-and-play installation in seconds

仕様

BrandMAIWO
ModelM.2 nvme SSD Enclosure
ColorGray
TypeEnclosure
AC AdapterNo
External InterfaceUSB 3.2 Gen 2
HDD Count SupportedSingle NVMe SSD
Number of Bay1 Bay
Maximum Capacity (per Bay)Up to 4TB
FanNo
Dimensions7.87*3.93*1 inch
Weight0.08lbs
Package Contents1x M.2 PCIe NVMe hard drive enclosure

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the MAIWO K1696P enclosure need a fan or thermal pad replacement after long use?

The enclosure has no fan and relies on its metal body for passive cooling, so there are no moving parts or thermal pads to replace over time.

What limits the 10 Gbps transfer rate during sustained heavy workloads?

The USB 3.2 Gen 2 interface caps throughput at 10 Gbps, so the enclosure itself becomes the bottleneck before the NVMe SSD reaches its own limits.

How hot or noisy does the K1696P get when running all day?

With no fan and a compact 7.87 by 3.93 inch aluminum shell, it stays silent and warm to the touch but does not throttle under typical all-day file transfers.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。