暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact storage box holding 48-piece nozzle cleaning kit with stainless steel needles, copper brushes, tweezers and Allen wrenches

MUNUOSIKEJI MNS-048-126 48-Piece 3D Printer Nozzle Cleaning Kit

SKU CH-5DWZ-2NFJQ

A 48-piece maintenance kit with 38 stainless steel needles in eight sizes from 0.15 to 0.8 mm, copper brushes, tweezers and Allen wrenches in a storage box

  • TypeMNS-048-126
  • Clears any nozzle with 8 needle sizes from .15 to .8mm
  • 38 stainless needles plus tweezers, brushes and wrenches in one case
  • Flexible steel needles bend 360 degrees without breaking inside hotend
  • Soft copper brushes clean hotend exterior without scratching nozzle surface
  • Fits Creality Ender 3, Anycubic, Elegoo, Sovol and most FDM printers

48-Piece Nozzle Cleaning Kit

The MUNUOSIKEJI MNS-048-126 kit supplies 48 tools for clearing FDM printer nozzles. It contains 38 stainless steel needles across eight diameters from 0.15mm to 0.8mm, plus two copper brushes, two precision tweezers and seven wrenches. The set targets hobbyists and workshop operators who want a single box for routine hotend maintenance and sudden blockages.

Thermals Noise and Power

This accessory has no moving parts, draws no electricity and produces no heat or sound during use. The flexible stainless steel needles bend to 360-degree angles inside the nozzle chamber without snapping. Soft copper bristles remove external residue without scratching the nozzle surface.

Upgrade From Basic Needle Sets

The kit replaces single-size needle packs that only fit one nozzle diameter. Buyers who print with multiple orifice sizes gain the full 0.15mm to 0.8mm range in one purchase. It is not for users who need filament-specific chemical solvents or automated cleaning stations.

特長

  • Clears any nozzle with 8 needle sizes from .15 to .8mm
  • 38 stainless needles plus tweezers, brushes and wrenches in one case
  • Flexible steel needles bend 360 degrees without breaking inside hotend
  • Soft copper brushes clean hotend exterior without scratching nozzle surface
  • Fits Creality Ender 3, Anycubic, Elegoo, Sovol and most FDM printers

仕様

BrandMUNUOSIKEJI
ModelMNS-048-126
Part NumberMNS-048-126
TypeMNS-048-126

この商品に関する質問

How do I use the 0.15 mm to 0.8 mm stainless steel needles without snapping them inside the hotend?

Heat the nozzle to printing temperature, select the needle matching your nozzle bore, and insert it gently with a slight twist; the flexible steel bends up to 360 degrees so you can clear the chamber without forcing the tip.

Which parts of the MNS-048-126 kit will wear out and need replacing first?

The copper brushes and the 38 stainless steel needles are consumables; brushes lose bristle stiffness and needles can deform after repeated heavy use, while the tweezers, Allen wrenches and storage box remain serviceable.

What is the first limitation I will hit when cleaning multiple nozzles back-to-back?

Needle diameter range stops at 0.8 mm, so any nozzle larger than that cannot be cleared with this kit; also, copper brushes soften with heat, reducing scrubbing effectiveness during extended sessions.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。