暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular metal AT power supply with fan and voltage selector switch

myVolts

myVolts 36V 10A 360W AT Power Supply

SKU CH-SKS7-SW3T7

A 36V 10A AT switching supply delivering 360W from 100–240V AC with selectable 110/220V input, overload and over-voltage protection, and a load-controlled cooling fan

  • TypeAT
  • Delivers stable 36 V DC output for reliable equipment operation
  • Universal 100–240 V AC input works worldwide without adapters
  • Selectable 110/220 V switch matches local mains voltage safely
  • Built-in overload, short-circuit and over-voltage protection safeguards connected devices
  • Auto on/off cooling fan runs only when needed for quieter low-load use

36 V 10 A AT power supply

This AT-type switching supply delivers a regulated 36 V output at up to 10 A for 360 W continuous power. It suits industrial automation, LED display systems and similar DC loads that require a fixed 36 V rail.

Universal AC input with voltage selector

A manual 110 V / 220 V switch sets the input range from 100 V to 240 V AC. Built-in short-circuit, overload and over-voltage protection plus an auto on/off cooling fan protect connected equipment and keep temperatures low under varying loads.

Replaces linear or lower-wattage 36 V units

The 360 W capacity upgrades installations that previously used smaller 36 V supplies or noisy linear transformers. The jump is worthwhile when the load demands the full 10 A or when fan-speed noise varies with load and must be accepted.

特長

  • Delivers stable 36 V DC output for reliable equipment operation
  • Universal 100–240 V AC input works worldwide without adapters
  • Selectable 110/220 V switch matches local mains voltage safely
  • Built-in overload, short-circuit and over-voltage protection safeguards connected devices
  • Auto on/off cooling fan runs only when needed for quieter low-load use

仕様

TypeAT

この商品に関する質問

Does the AT power supply accept both 110 V and 220 V mains?

Yes, a selector switch on the unit lets you choose 110 V or 220 V AC input before powering on.

What physical mounting does the 360 W unit require?

The supply is an open-frame SMPS designed for chassis mounting; four corner holes accept standard M3 screws.

How is the 36 V output wired and what step is often missed?

Connect the DC output terminals to your load observing polarity, then set the 110/220 V switch to match your mains before applying power.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。