暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact Pico-ATX board with 24-pin connector and cables

myVolts

myVolts Bayda 19V 200W Pico ATX Power Supply

SKU CH-5QPF-4Q01H

A fanless 200 W Pico ATX unit accepting 16 V to 24 V input and measuring 63 x 28 x 11.4 mm

  • TypeAT
  • Silent operation with fanless design
  • 200 W output from 16–24 V input
  • Solid polymer capacitors for long life
  • Ultra-compact 63 × 28 × 11.4 mm footprint
  • Ideal power solution for ITX motherboards

Pico ATX power for compact builds

The myVolts Bayda is a 19V input Pico ATX supply rated at 200 W output. It targets builders assembling thin ITX systems or mining rigs that run from a 16–24 V DC source. The module replaces a conventional ATX brick and plugs directly into a 24-pin motherboard connector.

Fanless polymer-capacitor construction

Solid polymer capacitors on the PCBA are specified for long service life. The 63 x 28 x 11.4 mm board has no moving parts, so operation is completely silent. A bundled cable set connects the module to the motherboard and peripheral leads, keeping cable routing simple inside space-constrained chassis.

Silent 200 W thermal envelope

With no fan, heat dissipates through the PCB and the surrounding airflow in the case. The unit accepts a wide 16–24 V input range and delivers up to 200 W continuous power within that envelope. Builders must ensure the case provides adequate passive ventilation to keep temperatures stable under load.

特長

  • Silent operation with fanless design
  • 200 W output from 16–24 V input
  • Solid polymer capacitors for long life
  • Ultra-compact 63 × 28 × 11.4 mm footprint
  • Ideal power solution for ITX motherboards

仕様

TypeAT

この商品に関する質問

What input voltage range does the 19 V 200 W Pico ATX unit accept?

It operates from a 16 V to 24 V DC source, so a 19 V laptop-style brick or compatible battery pack will power it.

Will the 63 mm by 28 mm board with 11.4 mm height clear my ITX case and motherboard standoffs?

The module measures 63 x 28 x 11.4 mm and uses a standard 24-pin ATX connector, fitting most ITX layouts without interfering with nearby headers.

How do I connect the 150 W ATX module cable to the motherboard without bending the 24-pin plug?

Route the short harness first, align the keyed 24-pin connector squarely, then press straight down until the latch clicks — forcing it at an angle is the common mistake.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。