我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Compact Pico-ATX board with 24-pin connector and cables

myVolts

myVolts Bayda 19V 200W Pico ATX Power Supply

SKU CH-5QPF-4Q01H

A fanless 200 W Pico ATX unit accepting 16 V to 24 V input and measuring 63 x 28 x 11.4 mm

  • TypeAT
  • Silent operation with fanless design
  • 200 W output from 16–24 V input
  • Solid polymer capacitors for long life
  • Ultra-compact 63 × 28 × 11.4 mm footprint
  • Ideal power solution for ITX motherboards

Pico ATX power for compact builds

The myVolts Bayda is a 19V input Pico ATX supply rated at 200 W output. It targets builders assembling thin ITX systems or mining rigs that run from a 16–24 V DC source. The module replaces a conventional ATX brick and plugs directly into a 24-pin motherboard connector.

Fanless polymer-capacitor construction

Solid polymer capacitors on the PCBA are specified for long service life. The 63 x 28 x 11.4 mm board has no moving parts, so operation is completely silent. A bundled cable set connects the module to the motherboard and peripheral leads, keeping cable routing simple inside space-constrained chassis.

Silent 200 W thermal envelope

With no fan, heat dissipates through the PCB and the surrounding airflow in the case. The unit accepts a wide 16–24 V input range and delivers up to 200 W continuous power within that envelope. Builders must ensure the case provides adequate passive ventilation to keep temperatures stable under load.

商品特色

  • Silent operation with fanless design
  • 200 W output from 16–24 V input
  • Solid polymer capacitors for long life
  • Ultra-compact 63 × 28 × 11.4 mm footprint
  • Ideal power solution for ITX motherboards

商品規格

TypeAT

商品問答

What input voltage range does the 19 V 200 W Pico ATX unit accept?

It operates from a 16 V to 24 V DC source, so a 19 V laptop-style brick or compatible battery pack will power it.

Will the 63 mm by 28 mm board with 11.4 mm height clear my ITX case and motherboard standoffs?

The module measures 63 x 28 x 11.4 mm and uses a standard 24-pin ATX connector, fitting most ITX layouts without interfering with nearby headers.

How do I connect the 150 W ATX module cable to the motherboard without bending the 24-pin plug?

Route the short harness first, align the keyed 24-pin connector squarely, then press straight down until the latch clicks — forcing it at an angle is the common mistake.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。