OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
myVolts
Adds six USB 3.0 ports through a single PCI-E 1x slot without extra power cables
This myVolts adapter turns a single PCI-E 1X slot into six USB 3.0 connectors for riser cards. It fits PCI-E 1X, 4X, 8X and 16X slots without an extra power cable. The board draws power directly from the slot, keeping the motherboard supply isolated. Target users are miners or builders who need many risers on one board.
Instead of occupying several PCI-E slots with individual risers, this card consolidates six connections into one slot. The jump is worth it when the motherboard has limited PCI-E lanes but spare USB 3.0 headers. It is not for builders who need more PCI-E lanes than the chipset provides or who require direct GPU-to-CPU bandwidth.
The card plugs straight into the PCI-E slot and screws to the case bracket. Only one cable runs to the slot, so cable routing stays simple. An onboard IC heatsink handles heat without a fan. What usually goes wrong: reversing the custom power lead or forcing the connector offsets, which can burn the board or snap header pins.
| Type | AT |
|---|
It fits a PCI-E 1X slot and is also compatible with 4X, 8X and 16X slots.
The guide stresses plugging the floppy power cord into the card before seating it in the slot, and warns against reversing or offsetting the custom cable.
The built-in IC heat radiator should be kept free of dust; if it becomes clogged or the thermal interface degrades, the radiator may need replacement.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?