EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
myVolts
Adds six USB 3.0 ports through a single PCI-E 1x slot without extra power cables
This myVolts adapter turns a single PCI-E 1X slot into six USB 3.0 connectors for riser cards. It fits PCI-E 1X, 4X, 8X and 16X slots without an extra power cable. The board draws power directly from the slot, keeping the motherboard supply isolated. Target users are miners or builders who need many risers on one board.
Instead of occupying several PCI-E slots with individual risers, this card consolidates six connections into one slot. The jump is worth it when the motherboard has limited PCI-E lanes but spare USB 3.0 headers. It is not for builders who need more PCI-E lanes than the chipset provides or who require direct GPU-to-CPU bandwidth.
The card plugs straight into the PCI-E slot and screws to the case bracket. Only one cable runs to the slot, so cable routing stays simple. An onboard IC heatsink handles heat without a fan. What usually goes wrong: reversing the custom power lead or forcing the connector offsets, which can burn the board or snap header pins.
| Type | AT |
|---|
It fits a PCI-E 1X slot and is also compatible with 4X, 8X and 16X slots.
The guide stresses plugging the floppy power cord into the card before seating it in the slot, and warns against reversing or offsetting the custom cable.
The built-in IC heat radiator should be kept free of dust; if it becomes clogged or the thermal interface degrades, the radiator may need replacement.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?