暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular metal power supply unit with built-in fan and terminal connections

myVolts

myVolts RSP-500-15 500W 15V Power Supply

SKU CH-RF5B-KEEHA

Enclosed 500 W AC/DC supply delivering 15 V at 33.4 A with active PFC, forced-air cooling and remote monitoring for industrial automation

  • TypeAT
  • 500 W single-output enclosed AC/DC power supply
  • Universal 85–264 VAC input with active PFC
  • High efficiency up to 90.5 % reduces heat
  • Forced air cooling by built-in DC fan
  • Remote ON-OFF, remote sense and DC OK signal built in

Industrial 500W 15V Power Supply

The myVolts RSP-500-15 is a 500W single-output enclosed AC/DC power supply delivering 15V at 33.4A. It suits factory automation control apparatus, test and measurement instruments, laser-related machines and burn-in facilities. The unit accepts a universal 85-264Vac input with built-in active PFC function for industrial environments.

Forced-Air Cooling 90.5% Efficiency

Forced air cooling by a built-in DC fan manages thermals during normal operation. High efficiency up to 90.5% reduces waste heat and power draw across the input range. Protections include short circuit, overload, over voltage and over temperature to maintain stable output.

Sustained Load Remote Monitoring

Remote ON-OFF control, remote sense and DC OK signal allow integration into automated factories and power distribution cabinets for continuous duty. The supply operates at ambient temperatures up to 70°C with fan speed control adapting to sustained loads. Three-year warranty covers industrial use cycles.

特長

  • 500 W single-output enclosed AC/DC power supply
  • Universal 85–264 VAC input with active PFC
  • High efficiency up to 90.5 % reduces heat
  • Forced air cooling by built-in DC fan
  • Remote ON-OFF, remote sense and DC OK signal built in

仕様

TypeAT

この商品に関する質問

How do I mount and wire the RSP-500-15, and which step causes the most trouble?

Screw the enclosed chassis to a flat metal surface using the four corner holes, then connect live, neutral and earth to the three‑pin input block; the step most installers miss is tightening the DC output terminals to the specified torque so the 33.4 A load cannot loosen them.

What part will need replacement first during continuous operation?

The built‑in DC cooling fan is the only moving component; after several years of 24/7 use at up to 70 °C ambient its bearings wear out and the fan must be swapped to keep forced‑air cooling effective.

At what point does the unit hit its limit under sustained full load?

The 500 W / 15 V output is capped at 33.4 A; if the draw exceeds that, overload protection activates and shuts the supply down until the load drops back within the rated current.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。