暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular aluminium power supply, silver finish, screw terminals visible

myVolts

myVolts S-600-12 12V 50A 600W Power Supply

SKU CH-VYWP-PVW2A

A 12 V, 600 W switch-mode supply with overload, overvoltage and short-circuit protection for industrial automation, LED lighting, CCTV and 3D printers

  • TypeAT
  • High efficiency with low DC ripple for stable output
  • circuit, overload and overvoltage protection built in
  • Operates from 0 to 40 °C with long service life
  • 100 % full-load burn-in test before shipment
  • CCC, FCC and CE safety compliance certified

Industrial 12 V power unit

This 600 W switch-mode supply delivers a regulated 12 V DC output at up to 50 A. It is built for industrial automation, LED displays, CCTV systems, 3D printers and similar equipment that require a stable DC source. The aluminium-alloy enclosure aids heat dissipation without a fan. Protection circuits guard against short circuit, overload and overvoltage conditions.

AC input tolerance and output adjust

The unit accepts a nominal 110 V or 220 V AC input with a ±15 % range, covering typical mains variation worldwide. A built-in adjustment potentiometer lets the installer trim the output voltage around the 12 V nominal level. Operating temperature is rated from 0 to 40 °C with humidity up to 95 % non-condensing.

50 A continuous current rating

The single specification that decides suitability is the 50 A maximum output current at 12 V. Systems drawing more than this will overload the supply, while lighter loads run well within its 600 W capacity. CCC, FCC and CE markings confirm basic safety compliance for the listed applications.

特長

  • High efficiency with low DC ripple for stable output
  • circuit, overload and overvoltage protection built in
  • Operates from 0 to 40 °C with long service life
  • 100 % full-load burn-in test before shipment
  • CCC, FCC and CE safety compliance certified

仕様

TypeAT

この商品に関する質問

Is the S-600-12 the right 12V unit for a 600W load?

Yes — this model delivers 12V at 50A for 600W continuous output, matching the headline rating exactly.

What does the 600W rating mean when the supply is installed in a machine?

It means the unit can sustain 50A at 12V DC continuously, with built-in short-circuit, overload and over-voltage protection and low DC ripple.

What AC input range does the S-600-12 accept, and what does that cap in practice?

The supply accepts AC 110/220V ±15%, so it operates worldwide on standard mains without manual voltage selection.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。