暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 SODIMM sticks, 260-pin, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 2Rx8 260-Pin SODIMM POSIFLEX ZT-3716E memory upgrade

SKU CH-M4AT-G3JYV

A 16 GB DDR4 SODIMM kit running at 3200 MHz with CL22 latency, built for the POSIFLEX ZT-3716E terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts multitasking on the POSIFLEX ZT-3716E
  • DDR4 3200 CL22 modules deliver responsive data rates for point-of-sale workloads
  • Low 1.2 V operation reduces power draw in always-on terminals
  • 260-pin SODIMM form factor fits the ZT series slot without adapters
  • Built with Samsung, Micron or Hynix ICs and stress-tested for reliability

POS terminal memory kit

This 16 GB kit contains two 8 GB DDR4 SODIMM modules rated at 3200 MHz with CL22 latency. The modules are unbuffered, non-ECC and operate at 1.2 V using a 260-pin form factor. They are built specifically for the POSIFLEX ZT-3716E Haydn ZT Series point-of-sale terminal.

Dual-channel configuration

Supplying the memory as a matched pair enables dual-channel operation on the supported platform. The 2Rx8 organisation and PC4-25600 rating are validated for the target system, so the upgrade installs without configuration changes. No heat spreaders are fitted, keeping the modules within the slim chassis clearance.

For POSIFLEX ZT-3716E owners

This kit suits technicians upgrading the named terminal to its maximum supported capacity. It is not intended for laptops, desktops or servers that require different pin counts, voltages or ECC functionality. Buyers needing higher frequencies, lower latencies or registered DIMMs should look elsewhere.

特長

  • 16 GB dual-channel kit boosts multitasking on the POSIFLEX ZT-3716E
  • DDR4 3200 CL22 modules deliver responsive data rates for point-of-sale workloads
  • Low 1.2 V operation reduces power draw in always-on terminals
  • 260-pin SODIMM form factor fits the ZT series slot without adapters
  • Built with Samsung, Micron or Hynix ICs and stress-tested for reliability

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT

この商品に関する質問

Will the 2Rx8 SODIMM modules need any firmware updates or periodic re-seating after installation in the POSIFLEX ZT-3716E?

No firmware updates or scheduled re-seating are required for these 2Rx8 DDR4 SODIMMs; they are designed for stable, long-term operation once installed in the compatible POS terminal.

What thermal limit appears first when the 1.20 V DDR4 3200 kit runs continuously in the POSIFLEX ZT-3716E?

The modules operate at standard 1.20 V without heat spreaders, so the system chassis airflow becomes the limiting factor before the memory itself reaches a thermal threshold.

How much extra power draw and fan noise should I expect from the 16 GB kit running all day in the POSIFLEX ZT-3716E?

At 1.20 V the kit adds minimal power draw, and with no onboard heat spreaders it relies on existing system airflow, so fan noise typically remains unchanged during continuous operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。