我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR4 SODIMM sticks, 260-pin, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 2Rx8 260-Pin SODIMM POSIFLEX ZT-3716E memory upgrade

SKU CH-M4AT-G3JYV

A 16 GB DDR4 SODIMM kit running at 3200 MHz with CL22 latency, built for the POSIFLEX ZT-3716E terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts multitasking on the POSIFLEX ZT-3716E
  • DDR4 3200 CL22 modules deliver responsive data rates for point-of-sale workloads
  • Low 1.2 V operation reduces power draw in always-on terminals
  • 260-pin SODIMM form factor fits the ZT series slot without adapters
  • Built with Samsung, Micron or Hynix ICs and stress-tested for reliability

POS terminal memory kit

This 16 GB kit contains two 8 GB DDR4 SODIMM modules rated at 3200 MHz with CL22 latency. The modules are unbuffered, non-ECC and operate at 1.2 V using a 260-pin form factor. They are built specifically for the POSIFLEX ZT-3716E Haydn ZT Series point-of-sale terminal.

Dual-channel configuration

Supplying the memory as a matched pair enables dual-channel operation on the supported platform. The 2Rx8 organisation and PC4-25600 rating are validated for the target system, so the upgrade installs without configuration changes. No heat spreaders are fitted, keeping the modules within the slim chassis clearance.

For POSIFLEX ZT-3716E owners

This kit suits technicians upgrading the named terminal to its maximum supported capacity. It is not intended for laptops, desktops or servers that require different pin counts, voltages or ECC functionality. Buyers needing higher frequencies, lower latencies or registered DIMMs should look elsewhere.

商品特色

  • 16 GB dual-channel kit boosts multitasking on the POSIFLEX ZT-3716E
  • DDR4 3200 CL22 modules deliver responsive data rates for point-of-sale workloads
  • Low 1.2 V operation reduces power draw in always-on terminals
  • 260-pin SODIMM form factor fits the ZT series slot without adapters
  • Built with Samsung, Micron or Hynix ICs and stress-tested for reliability

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT

商品問答

Will the 2Rx8 SODIMM modules need any firmware updates or periodic re-seating after installation in the POSIFLEX ZT-3716E?

No firmware updates or scheduled re-seating are required for these 2Rx8 DDR4 SODIMMs; they are designed for stable, long-term operation once installed in the compatible POS terminal.

What thermal limit appears first when the 1.20 V DDR4 3200 kit runs continuously in the POSIFLEX ZT-3716E?

The modules operate at standard 1.20 V without heat spreaders, so the system chassis airflow becomes the limiting factor before the memory itself reaches a thermal threshold.

How much extra power draw and fan noise should I expect from the 16 GB kit running all day in the POSIFLEX ZT-3716E?

At 1.20 V the kit adds minimal power draw, and with no onboard heat spreaders it relies on existing system airflow, so fan noise typically remains unchanged during continuous operation.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。